Battery Impedance Meter BIM300B | up to 60 V
- Order number: BR-BIM300B
BRS Messtechnik BIM300B
Battery Impedance Meter for use in the development, production and quality assurance to measure high-resistance battery cells and supercapacitors
The BRS Battery Impedance Meter BIM300B is particularly suitable for the analysis, qualification, testing and diagnosis of high resistance battery cells and supercapacitors up to 60V. Five ranges (3/10/30/100/300 Ω)) are available for impedance measurement. The voltage measurement is possible in two ranges (5 V and 60 V). The frequency range for the spectral impedance measurement is from 0,1 Hz to 1 kHz.
Applications of the Battery Impedance Meter BIM300B:
- Impedance measurement for high-resistance battery cells and supercapacitors
- Single frequency measurement and spectral impedance measurement (EIS)
- Graphical representation of the locus (Nyquist diagram)
- Automatic calculation of the model parameters
- Offline analysis of spectral measurements
- Measurement of the battery voltage
Specifications of the Battery Impedance Meter BIM300B:
- Voltage: up to 60 V
- Frequency range: 0,1 Hz up to 1 kHz
- Impedance range: up to 300 Ω
- USB interface for supply and communication
Options & accessories of the Battery Impedance Meter BIM300B:
| MK-L | Universal measuring cable (1 m) with four laboratory plugs (4 mm) for internal resistance and impedance measurements |
| MK-L-Set | Measuring cable MK-L inclusive four alligator clips and four cable lug adapters for M4 / M6 / M8 |
| MK-O | Measuring cable (0,8 m) with open ends |
| MK-K | Measuring cable (1 m) with two big Kelvin clamps for internal resistance measurements on larger batteries |
| MK-S | Measuring cable (1 m) with two small Kelvin clamps for internal resistance measurements on smaller batteries |
| MK-T100 | Measuring cable (1 m) with two small coaxial Kelvin buttons for internal resistance measurements for all battery poles with bare surfaces |
| MK-T200 | Measuring cable (1 m) with two big buttons for internal resistance measurements suitable for aluminum battery poles and dirty surfaces |
| CTA | Round Cell Adapter for impedance and capacity measurements using four-wire technology on battery cells (18650, 21700 and 26650) up to 5 A |
| BMUX15/4 | Switch (multiplexer) for direct impedance and voltage measurement of up to 15 cells on an impedance measuring device without replugging |
| VK-BMUX | Connection cable between measuring device and BMUX15/4 |
Scope of delivery of the Battery Impedance Meter BIM300B:
- BIM300B device
- Software
- USB cable
- Operating Manual
BRS Messtechnik, based in Stuttgart, Germany, specializes in battery measurement technology and manufactures both battery measurement instruments and battery test systems. The compact battery testers operate independently of technology and can test batteries at cell and module level as well as accumulators quickly and effectively.
The instruments are suitable for use in development for suitability analyses, in manufacturing for quality control as well as in the field of reuse to determine aging processes. In addition, customized measuring devices and modules are also manufactured.
GW-GPD-Serie
GW-APS-7000E-Serie
GW-APS-7000-Serie
GW-GPS-x303-Serie
GW-GPS-Serie
GW-PEL-500-Serie
GW-PEL-2000B-Serie
GW-GPT-9800-Serie
GW-GPT-12000-Serie
GW-GPM-8213
GW-GLC-9000
GW-AFG-3021
GW-USG-2030
GW-GDM-350B
