
- Order number: BR-BTC1B
BRS Messtechnik BTC1B
Universal Battery Test-Center for research and development of battery cells and modules
The BRS Battery Test-Center BTC1B is a universal device for the analysis, qualification, testing and suitability tests of battery cells and modules up to 60V. Discharge currents of up to 2 A are possible for capacity measurement. The impedance measurement is divided into several ranges up to max. 1 Ω. The voltage measurement is possible in two ranges (5 V and 60 V). The frequency range for spectral impedance measurement is from 0.1 Hz to 1 kHz.
Applications of the Battery Test-Center BTC1B:
- Measurement of impedance according to active and reactive component or amount and phase
- Single frequency measurement and spectral impedance measurement (EIS)
- Graphical representation of the locus (Nyquist diagram)
- Automatic calculation of the model parameters
- Offline analysis of spectral measurements
- Measurement of the battery voltage
- Measurement of the ambient temperature via an external sensor
- Measurement of capacity with discharge currents up to 2 A
Specifications of the Battery Test-Center BTC1B:
- Voltage: up to 60 V
- Frequency measuring range: 0,1 Hz to 1 kHz
- Impedance measuring range: 1 mΩ up to 1 Ω
- Temperature measuring range: 0 °C up to 60 °C
- USB interface for supply and communication
Options & accessories of the Battery Test-Center BTC1B:
MK-L | Universal measuring cable (1 m) with four laboratory plugs (4 mm) for internal resistance and impedance measurements |
MK-L-Set | Measuring cable MK-L inclusive four alligator clips and four cable lug adapters for M4 / M6 / M8 |
MK-O | Measuring cable (0,8 m) with open ends |
MK-K | Measuring cable (1 m) with two big Kelvin clamps for internal resistance measurements on larger batteries |
MK-S | Measuring cable (1 m) with two small Kelvin clamps for internal resistance measurements on smaller batteries |
MK-T100 | Measuring cable (1 m) with two small coaxial Kelvin buttons for internal resistance measurements for all battery poles with bare surfaces |
MK-T200 | Measuring cable (1 m) with two big buttons for internal resistance measurements suitable for aluminum battery poles and dirty surfaces |
TMK-PT1000 | Measuring cable (1 m) with Pt1000 temperature-sensor in TO92 housing |
CTA | Round Cell Adapter for impedance and capacity measurements using four-wire technology on battery cells (18650, 21700 and 26650) up to 5 A |
BMUX15/4 | Switch (multiplexer) for direct impedance and voltage measurement of up to 15 cells on an impedance measuring device without replugging |
VK-BMUX | Connection cable between measuring device and BMUX15/4 |
Scope of delivery of the Battery Test-Center BTC1B:
- BTC1B device
- USB cable
- Software
- Operating Manual
BRS Messtechnik, based in Stuttgart, Germany, specializes in battery measurement technology and manufactures both battery measurement instruments and battery test systems. The compact battery testers operate independently of technology and can test batteries at cell and module level as well as accumulators quickly and effectively.
The instruments are suitable for use in development for suitability analyses, in manufacturing for quality control as well as in the field of reuse to determine aging processes. In addition, customized measuring devices and modules are also manufactured.
GW-GPD-Serie
GW-APS-7000E-Serie
GW-APS-7000-Serie
GW-GDM-350B
GW-GPS-x303-Serie
GW-GPS-Serie
GW-PEL-500-Serie
BSW-SRCONF-141SMAMM
GW-PEL-2000B-Serie
GW-GPT-9800-Serie
GW-GPT-12000-Serie
MPE-XR-Serie
MPE-DBx-Module
GW-GPM-8213
GW-GBM-3080
GW-GLC-9000
GW-GSB-01
GW-USG-2030