DC Electronic Load | 80 V, 70 A, 350 W

€1,280.00 *

Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

Order number: GW-PEL-504-80-70

Available downloads:

GW Instek PEL-504-80-70 DC Electronic Load Voltage: 80 V, Current: 70 A, Power: 350 W The... more

Close menu

Product information "DC Electronic Load | 80 V, 70 A, 350 W"

GW Instek PEL-504-80-70
DC Electronic Load
Voltage: 80 V, Current: 70 A, Power: 350 W

The PEL-500 Series single-channel programmable electronic load has a total of 5 models and provides 0~80V/ 0~500V voltage operating ranges and 250~700W power operating range. The series can be applied to R&D, quality control, ATE system and production test, including voltage source/current source test; switching power supply transient response; constant voltage mode for current limiting test; battery simulation; and battery discharge test.

Features of programmable D.C. Electronic Load PEL-504-80-70

Voltage: 80 V
Current: 70 A
Power: 350 W
5-digit Digital Voltage, Current and Power Meter
Simultaneous Display of Voltage, Current, and Watts
Short-circuit Time Can be Set During Short-circuit Test
Automatic Test Function of Overcurrent Protection/Overpower Protection
The Battery Discharge Test Function Can Set The Discharge Stop Voltage (Vbatt),
Discharge Capacity (Ah, Wh) and Stop Discharge Time
Surge Test Can Simulate Boot Overshoot Current and Transient Current From Hot Plugging
Constant Current, Constant Resistance, Constant Voltage, Constant Power and Dynamic Mode
Overvoltage, Overcurrent, Over Power, Over Temperature Protection and Reverse Polarity Detection
Voltage Polarity Display Can be Set to Positive Value ("+") or Negative Value ("-")
Communications Interface: RS-232, USB

Description of programmable D.C. Electronic Load PEL-504-80-70

DC Electronic Load PEL-500 Series stand-alone load has its own control and display panel, CC / CR / CV / CP/ Dynamic modes, also can be controlled intranet via RS232 and USB interface
SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current
Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually
The additional Short, OCP, OPP, Batt and Surge test function operated by both manual and remote that will be more efficiency and accuracy on Short, OCP, OPP, Batt and Surge testing
Programmable loading voltage/unloading voltage, GO / NG meter check, Voltage polarity display can be set to positive value ("+") or negative value ("-"). That is much advance feature for each different application

Applications programmable D.C. Electronic Load PEL-504-80-70

Voltage/Current Source Test
Transient Response of Switching Power Supply
Constant Voltage Mode for Current Limiting Test and Battery Simulation
Battery Discharge
R&D, Quality Control
ATE System
Production

Related links to "DC Electronic Load | 80 V, 70 A, 350 W"

Hersteller aufklappen

Menü schließen

Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.

After decades of experience in the test and measurement industry, GW Instek has grown to become one of the important manufacturers and developers of test and measurement instruments worldwide. Today GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test & measurement instruments to video surveillance systems. GW Instek has also seen its present growth internationally. With headquarters located in Taipei, Taiwan, GW Instek has subsidiaries in mainland China, America, Japan, Korea, Malaysia, Europe, and India; its products are sold to more than 80 countries worldwide.

With a strong focus on high quality, economical measurement solutions for the educational and industrial manufacturing markets, Good Will Instrument has developed a solid brand image and reputation for reliability, integrity and innovation. From its inception, GW Instek has dedicated itself to becoming a professional electronic test and measurement designer and manufacturer, resulting in a number of national awards and the trust of customers world-wide; In 1993 Good Will Instrument became ISO 9002 accredited and the following year won the Highest Honor of National Outstanding SMEs (small and medium enterprises) Award from the Taiwanese Ministry of Economic Affairs. In 2000, Good Will Instrument went public on the Taiwan Stock Exchange.

GW Instek has been a byword for quality electronic test & measurement instruments due to its decades of experience in R&D, marketing and manufacturing. GW Instek's reputation has been built upon the philosophy of integrity, quality, and creativity as well as the accumulation of years of experience. Focusing on the improvement of R&D, manufacturing and marketing competitiveness, GW Instek will continue to be one of the most reliable, trusted brands creating the highest value for customers.