Digital Power Meter

GW Instek GPM-8310
with RS-232C / USB device & host / LAN / GPIB

The GW Instek GPM-8310 is a digital power meter for single-phase AC power measurement. Features include DC, 0.1Hz~100kHz test bandwidth, 16-bit A/D, and 300 kHz sampling rate. It adopts 5” TFT LCD screen with a 5 digit measurement display and provides 25 power measurement related parameters and has a high precision measurement capability. It also features the ability to display waveform (voltage/current/power), the integration measurement function, harmonic measurement, and analysis of each order (meeting the IEC 61000-4-7 harmonics measurement requirements at 50/60Hz), external sensor input terminals, and various communication interfaces, etc., to help users achieve clear, convenient, and accurate power measurements. This GPM-8310 is a most cost-effective power meter with most complete range of functionalities.

Features of Digital Power Meter GPM-8310

• 5“TFT LCD
• Input current: 20 A
• DC, 0.1 Hz ~ 100 kHz Voltage / Current Test Bandwith
• Two Numerical Display Modes
  • General Mode: Displays 2 Main Test Items + 8 Secondary Test Items
  • Simple Mode: Displays the Test Values of 4 Main Test Items
• Waveform Display: V (voltage), I (current), P (power)
• The Current / Voltage can be Measured to a Deformed Wave with a CF of 3, and the Half-range CF can Reach 6 or 6 A
• Meets the IEC 61000-4-7 Harmonics Measurement Requirements (50 / 60 Hz)
• 50th Order of Harmonic Measurement and Anaysis (value and bar graph)
• Integration Function Supports Automatic Level-charging
• External Current Sensor Input Terminals (EXT1 / EXT2)
• Standard Interfaces: RS-232C, USB Device / Host, LAN, GPIB
• Optional Interface: Digital I / O (DA4) (must be installed before leaving the factory)
• Optional Accessory: GPM-001
• Warranty: 2 Years

Option of Digital Power Meter GPM-8310

• Opt.01 DA4 Interface (including cable, GTL-214) to make Model GW-GPM-8310-DA4
  Note : Optional DA4 interface must be installed in factory

Accessories of Digital Power Meter GPM-8310

• Safety Instruction Sheet x 1, Power cord x 1
• Test lead GTL-209 x 1, Test lead GTL-212 x 1
• CD x 1 (including complete user manual and USB driver)
• DA4 cable GTL-214 (available for GPM-8310 with DA4 only)

Optional Accessories of Digital Power Meter GPM-8310

• GPM-001 Test Fixture (including GTL-210 x 2, GTL-213 x 1)
• GPM-001(EU) Test Fixture (including GTL-210 x 2, GTL-213 x 1)
• GTL-209 Test Lead, Banana to Bare-wire, Approx. 1000mm GTL-210
• Test Lead, Banana to Banana, Approx. 1000mm GTL-212
• Test Lead, O-Type to Bare-wire, Approx. 1000mm GTL-213
• Test Lead, O-Type to Banana, Approx. 1000mm GTL-214
• DA4 Cable, Approx. 1000mm GTL-232
• RS-232C cable, 9-pin Female to 9-pin, null modem for computer, Approx. 2000mm GTL-246
• USB Cable, A-B type, Approx. 1200mm GTL-248
• GPIB Cable, Approx. 2000mm GRA-422
• Rack Mount Kit, 19” 2U size