Epsilon EClipse single-channel potentiostat/ galvanostat/ bipotentiostat I EF-1031F

BASi Research Products, Inc | EF-1031F
Potentiostat/ Galvanostat/ Bipotentiostat
Potential range: ±12 V, current range: ±100 mA 

The Epsilon EClipse™ is the latest electrochemical analyzer from BASi. It is a potentiostat/galvanostat with a second working electrode for bipotentiostat measurements. It is supplied with software that enables the most common electrochemical techniques such as cyclic voltammetry, chronoamperometry and chronopotentiometry. The Epsilon EClipse™ has a wide potential range (-12 to 12 V) and current range (-100 to 100 mA).

Functions of the Epsilon EClipse™ single-channel potentiostat EF-1031F

• Bipotentiostat
• Potential range: ±12
• 8 current ranges: 1 nA to 100 mA
• Current range: ±100 mA
• Potential resolution: 0.1 mV
• ADC resolution: 16 bit
• Sampling frequency: 50 kHz
• Power supply: USB USB

Possible applications of the Epsilon EClipse™ single-channel potentiostat EF-1031F

• Analytical chemistry
• Electrochemistry
• Battery test
• Corrosion test
• Synthesis
• Research and development
• etc.

Specifications of the Epsilon EClipse™ single-channel potentiostat EF-1031F

Potentiostat

• Channel 1: Dynamic DAC: 16 bit, ±3.275 V at 0.1 mV resolution or ±10 V at 0.33 mV resolution
• Offset DAC: 8 bit, ±2.55 V at 10 mV resolution
• Channel 2: Dynamic DAC: 8 bit, ±2.55 V at 10 mV resolution
• Potential range: ±12 V
• Current range: ±100 mA
• Bandwidth: > 100 kHz
• Bias current: < 1 pA
• Input impedance: > 1012 W

(Values for parameters other than the applied potential apply to both channels)

Current/voltage converter

• Current ranges: 1 nA, 10 nA, 100 nA, 1 µA, 10 µA, 100 µA, 1 mA, 10 mA, 100 mA
• ADC resolution: 16 bit
• Sampling rate: 50 kHz (20 µs/conversion)
• Data length: up to 64k points - fast

Galvanostat

• Applied current: 50 pA - 50 mA
• Range: ±10 V ±1 V
• Resolution of the measured potential: 0.02 mV
• Maximum leakage current: 30 pA

Input/Output

• E_out (applied potential)

• I_out (current/voltage output)
• E_in (input connection for externally applied waveform)
• Cell Stand Port (control of C-3 Cell Stand and CGME)
• PC (USB) port
• Trigger output (TTL)

Minimum PC requirements

• Win 7 or newer
• Pentium III
• 512 MB RAM
• 50 MB available hard disk space
• USB port