High power supply AC, DC | IT7800 Series

ITECH IT7800 Series
Programmable high power AC / DC power supply unit
Programmable, 3 U up to 15 kVA, up to 960 kVA with master-slave (several units in parallel), 4 output modes

Features of the IT7800 programmable high-performance power supply unit

• High power density, 3U up to 15 kVA
• Master-slave in parallel with current sharing technology, up to 960 kVA, multiple units in parallel work as one
• Output frequency: 16-2400 Hz, programmable slew rate to change voltage and frequency
• Built-in single-phase / three-phase AC meter
• 4 output modes: AC / DC / AC + DC / DC + AC
• Intuitive touch screen interface
• Simulate any waveform output and support csv. File import
• Various waveforms built in
• List mode simulates power supply playback function to realise instantaneous power interruption simulation function
• Provides various trigger input / output signals. When amplitude / frequency changes, trigger signals can be generated to synchronously capture the current waveform of DUTs
• The start / stop phase angle of the output 0-360 ° can be set
• Overvoltage / sag function
• Relay STRG function to disconnect the connection between instrument and DUT
• Built-in USB / CAN / LAN / Digital IO interface, optional GPIB / Analog & RS232
• The multi-channel function allows to test 3 independent DUT at the same time without adding additional hardware configuration

The IT7800 Programmable Power Supply

IT7800 High power programmable AC / DC power supply with output power up to 15 kVA, voltage ranges up to 350 V L-N and 500 V L-N. Users can increase output power up to 960 kVA by configuring master-slave in parallel. With the intuitive LCD touchscreen interface, users can quickly become familiar with the unit's operation.

The IT7800 series is a built-in power meter and arbitrary waveform generator that can simulate harmonics and other outputs for any waveform. Users can choose from single-phase, three-phase, phase inversion and multi-channel 4-output modes with programmable output and full measurements. The ITECH IT7800 series is designed for new power, power electronics, research institutes, etc. With a size of only 3 RU, ITECH IT7800 can achieve 15 kVA for power supply as well as 350 V L-N / 500 V L-N for voltage. Compared to traditional AC power sources, it saves a lot of space for users.

ITECH IT7800 series can deliver more power using the parallel master / slave output function with 64 units connected in parallel to achieve maximum total output power. 960 kVA. The IT7800 has synchronous on / off input and output signals that ensure synchronisation of parallelisation and synchronous power distribution of multiple modules. After parallelisation, not only are all functions maintained, but there is no loss of accuracy. Make the power supply system setup faster, more flexible and economical, whether it is a stand-alone test or an ATE system, it is easy to achieve.

Models