High Voltage Switching System | 964i Series

VITREK 964i Series
Automated High Voltage Switching System

The 964i automated high-voltage switching system from Vitrek forwards high-voltage test signals and return signals to any test points. The system can be easily configured for any test requirement and can accommodate up to 8 eight-channel HV relay cards. This corresponds to up to 64 test points in a single mainframe. Voltage ratings of 3 kV, 7 kV, 10 kV and 15 kV are available. Several devices can be combined to increase the capacity. The cards can also be used to access other devices such as an LCR meter or DMM. Up to four systems can be connected directly from a 95X series or V7X series Hipot tester or up to 10 systems can be connected to a PC via the RS232 interface or the optional GPIB interface. The system status and switch activation is shown on the LCD display. Three pre-built models are offered as standard. For customer-specific requirements, the system can be configured as required using the wide range of accessories.

Specifications of the High Voltage Switching System 964i Series

• 8 slots for relay cards
• Interfaces: RS232, GPIB optional
• VICL interface (Vitrek Hipot Control)
• Max. Voltage values up to 3 kV, 7 kV, 10 kV or 15 kV
• Voltage switching capability up to 15000 V
• Current switching capability up to 40 A
• Up to 64 channels possible in one unit
• Graphical QuickTest™ software with data acquisition
• Safety Tested per EN 61010

Models of the High Voltage Switching System 964i Series