Programmable DC-Electronic Load | PEL-2000B-Series
- Order number: GW-PEL-2000B-Serie
GW Instek PEL-2000B-Series
Programmable DC-Electronic Load
Voltage up to 500 V, Current up to 70 A, Power up to 350 W
The PEL-2000B series are multi-channel, programmable, electronic DC loads. The series includes two base units (mainframes). PEL-2002B is used to hold and control 2 load modules, while PEL-2004B is used to hold and control 4 load modules. Due to the modular design, all base units and load modules can be combined as desired. There are 4 different load modules available, allowing numerous configuration options to meet a wide range of test conditions. For applications with higher load capacities, several base units can be connected in parallel. Thus, a total capacity of up to 7 kW can be achieved.
Note: The PEL-2000B series is fully compatible with the functions and specifications of the PEL-2000A series. After updating the firmware, the load modules and base units (mainframes) of the PEL-2000A series and PEL-2000B series can be combined as needed. For further information please refer to Tel.: +49 7032 8959317 or info@lxinstruments.com
Applications of the PEL-2000B Series Programmable DC-Electronic Load
Test of
- Power supplies
- DC/DC-converter
- Battery modules
- Semiconductor circuits
- Quality checks
- Certification
- Characterization
- High speed test
- etc.
Available Models of the PEL-2000B Series Programmable DC-Electronic Load
| PEL-2020B | PEL-2030B | PEL-2040B | PEL-2041B | ||||||
| Channels | Dual channel | Dual channel | Single channel | Single channel | |||||
| left/right | left/right | left | right | ||||||
| Range | low | High | - - - | low | high | low | high | low | high |
| Current | 0 to 2 A | 0 to 20 A | 0 to 5 A | 0 to 4 A | 0 to 40 A | 0 to 7 A | 0 to 70 A | 0 to 1 A | 0 to 10 A |
| Power | 100 W | 30 W | 250 W | 350 W | 350 W | ||||
| Voltage | 0 to 80 V | 0 to 80 V | 0 to 80 V | 0 to 500 V | |||||
Base units (mainframes)
| PEL-2002B | PEL-2004B |
| 2-slot base unit (mainframe) with a | 4-slot base unit (mainframe) with a |
Specifications of the PEL-2000B Series Programmable DC-Electronic Load
- Voltage: up to 500 V
- Current: up to 70 A
- Power: up to 350 W
- Protection modes: OPP/OCP/OVP/OTP/RVP/UVP
- Flexible configuration of mainframes and load modules
- Operating modes: CC/CR/CV
- Up to 8 independent load inputs
- Interfaces: USB/RS-232/RS-485/LAN – optional GPIB
Options & accessories of the PEL-2000B Series Programmable DC-Electronic Load
- PEL-001, GPIB-interface (only factory installation)
- PEL-002, PEL-2000 Rack Mount kit
- PEL-003, Panel cover
- PEL-016, LAN-Interface card
- GTL-248, GPIB cable (2 m)
- GTL-249, Frame link cable
- GTL-246, USB cable, USB 2.0 A-B Type
- GTL-232, RS-232 cable, 9-pin
Scope of delivery of the PEL-2000B Series Programmable DC-Electronic Load
- PEL-2002B: Operating manual, Power cord, Panel cover (1 x)
- PEL-2004B: Operating manual, Power cord, Panel cover (3 x))
- PEL-2020B, PEL-2030B, PEL-2040B, PEL-2041B: Test Lead, Sense Lead
Note: Load modules cannot be used without a base unit (mainframe)
- Do you have any questions concerning this product?
- Further products by GW Instek (Good Will Instruments)
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.
After decades of experience in the test and measurement industry, GW Instek has grown to become one of the important manufacturers and developers of test and measurement instruments worldwide. Today GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test & measurement instruments to video surveillance systems. GW Instek has also seen its present growth internationally. With headquarters located in Taipei, Taiwan, GW Instek has subsidiaries in mainland China, America, Japan, Korea, Malaysia, Europe, and India; its products are sold to more than 80 countries worldwide.
With a strong focus on high quality, economical measurement solutions for the educational and industrial manufacturing markets, Good Will Instrument has developed a solid brand image and reputation for reliability, integrity and innovation. From its inception, GW Instek has dedicated itself to becoming a professional electronic test and measurement designer and manufacturer, resulting in a number of national awards and the trust of customers world-wide; In 1993 Good Will Instrument became ISO 9002 accredited and the following year won the Highest Honor of National Outstanding SMEs (small and medium enterprises) Award from the Taiwanese Ministry of Economic Affairs. In 2000, Good Will Instrument went public on the Taiwan Stock Exchange.
GW Instek has been a byword for quality electronic test & measurement instruments due to its decades of experience in R&D, marketing and manufacturing. GW Instek's reputation has been built upon the philosophy of integrity, quality, and creativity as well as the accumulation of years of experience. Focusing on the improvement of R&D, manufacturing and marketing competitiveness, GW Instek will continue to be one of the most reliable, trusted brands creating the highest value for customers.
GW-GPS-x303-Serie
GW-PSB-2000-Serie
GW-PPX-Serie
GW-GPR-M-Serie
GW-GPR-H-Serie
GW-GPD-Serie
GW-APS-7000-Serie
GW-GPS-Serie
LX-Magpie
MPE-SLx-Serie
GW-APS-7000E-Serie
GW-SPS-Serie
GW-GPT-9800-Serie
GW-GPT-12000-Serie
GW-GPM-8213
GW-GLC-9000
GW-AFG-3021
GW-USG-2030
GW-MFG-2110
