For professionals (EU countries) | All data subject to change
Give us a call: +49(0)7032 / 895 93-3

Programmable DC Power Supply | PSB-2800L

Programmable DC Power Supply | PSB-2800L
€1,759.00 *
Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

  • GW-PSB-2800L
Available downloads (Subject to change)
Model GW Instek:GW-PSB-2800L Power Supply DC- Programmable - Multi-Range - 80V / 80A / 800W... more
Product information "Programmable DC Power Supply | PSB-2800L"

Model GW Instek:GW-PSB-2800L
Power Supply DC- Programmable - Multi-Range - 80V / 80A / 800W

●90 Degree Rotating Panel Operation [Vertically or Horizontally]
●Constant Power Output for Multi-Range(V&I)Operation
●Series Operation (2 Units in Series Maximum)
●Parallel Operation (4 Units in Parallel Maximum)
●Sequence function (edited by PC)
●Standard Interafce: RS-232C / USB / Analog Control Interface
●Optional Interface: GPIB

● Scope of Delivery:
   GW Instek GW-PSB-2000 Series Base Unit
   Power Cord
   External Control Connector (26pin)
   Screws for output terminals on rear panel
   Protection covers for output terminals on rear panel
   Protection caps for output terminals on the front panel
   GND Cable
   USB Cable
   Local Bus

● Optional Accessories (not included):
   PSB-001 GPIB Card
   PSB-003 Parallel connection kit (for horizontal installation)
   PSB-004 Parallel connection kit (for vertical installation)
   PSB-005 Parallel Connection Signal Cable
   PSB-006 Serial Connection Signal Cable
   PSB-007 Joint Kit: Includes 4 joining plates

The PSB-2000 series, which is a high power density, programmable and multi-range output DC power supply. There are six models in the series including one power booster unit. The PSB-2000 series has the output voltage of 0~80V and 0~800V, and the output power ranges of 0~400W and 0~800W. The multi-range output functionality facilitates flexible collocations of higher voltage and larger current under the rated power range. Both series and parallel connections can be applied to the PSB-2000 series to fulfill the requirements of higher power output range. The PSB-2000 series provides three sets of preset function keys to memorize regularly used settings of voltage, current and power that users can recall rapidly. The sequence function, via RS232C, USB interface or optional GPIB interface, can connect with the computer to produce output power defined by sequence of a series of set voltage and current steps that are defined by the computer. This function is often used to establish a standard test procedure for the verification of the influence on DUTs done by the swiftly changing operating conditions.

The PSB-2000 series protects over voltage and over current. The power supply output function will be shut down to protect DUTs while the protection mechanism is triggered to function. When conducting battery charging operation, the Hi-W mode of thePSB-2000 series will prevent reverse current from damaging power supply. The PSB-2000 series provides analog control and analog monitor interfaces on the rear panel to control PSB-2000 output via the external voltage or to externally monitor voltage and current output status of power supply. PSB-2000 panel can be rotated 90 degree angle suitable for vertical or horizontal position to accommodate the ideal space utilization.

Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.

After decades of experience in the test and measurement industry, GW Instek has grown to become one of the important manufacturers and developers of test and measurement instruments worldwide. Today GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test & measurement instruments to video surveillance systems. GW Instek has also seen its present growth internationally. With headquarters located in Taipei, Taiwan, GW Instek has subsidiaries in mainland China, America, Japan, Korea, Malaysia, Europe, and India; its products are sold to more than 80 countries worldwide.

With a strong focus on high quality, economical measurement solutions for the educational and industrial manufacturing markets, Good Will Instrument has developed a solid brand image and reputation for reliability, integrity and innovation. From its inception, GW Instek has dedicated itself to becoming a professional electronic test and measurement designer and manufacturer, resulting in a number of national awards and the trust of customers world-wide; In 1993 Good Will Instrument became ISO 9002 accredited and the following year won the Highest Honor of National Outstanding SMEs (small and medium enterprises) Award from the Taiwanese Ministry of Economic Affairs. In 2000, Good Will Instrument went public on the Taiwan Stock Exchange.

GW Instek has been a byword for quality electronic test & measurement instruments due to its decades of experience in R&D, marketing and manufacturing. GW Instek's reputation has been built upon the philosophy of integrity, quality, and creativity as well as the accumulation of years of experience. Focusing on the improvement of R&D, manufacturing and marketing competitiveness, GW Instek will continue to be one of the most reliable, trusted brands creating the highest value for customers.