LXinstruments HVEx00 | High Voltage Test Enclosure 10 kV
Protects operators from accidental contact and integrates flexibly into manual or automated test stations.
- ✓ Operating voltage: up to 10 kV
- ✓ Usable test space: up to 750 × 460 × 500 mm
- ✓ Configurations: with or without changeover system
10 kV High-Voltage Test Hood
LXinstruments HVEx00 Series: High-Voltage Testing in Development and Series Production
The LXinstruments HVEx00 Series protects operators during high-voltage and insulation testing of devices, assemblies, and components.
The high-voltage test hood rated up to 10 kV forms an enclosed test cage that protects the DUT and its electrical connections against accidental contact during testing. The test hoods can be easily integrated into manual or computer-controlled test stations for development, quality assurance, and series production.
Safety and Hood Mechanism
The transparent, illuminated hood keeps the DUT and its electrical connections clearly visible throughout the test. A safety switch detects whether the hood is closed and enables the high voltage only when the hood is fully closed. Gas springs and ball-bearing hinges make opening and closing easier, especially when DUTs are changed frequently.
Changeover Kit for Different DUT Fixtures
Models with interchangeable fixtures allow adapter plates for different DUTs and electrical connections to be replaced quickly. The space beneath each fixture provides room for cables, connectors, and interfaces. Models without a changeover kit are designed for permanently configured test stations.
Selection by Test-Space Size and Adapter Concept
The HVEx00 Series is available in two sizes. The appropriate high-voltage test hood depends on the size, number, and arrangement of the DUTs, as well as the required fixture or changeover system.
Alternative Products
When a test hood and high-voltage tester are required as a coordinated complete solution, the LXinstruments HVE900IS High-Voltage Test Hood with Integrated Hipot Tester is a suitable alternative. Its larger test space accommodates larger DUTs and can be configured with a PC, test software, and an additional safety circuit.
Related Product Categories
Test Hoods | Hipot Testers and High-Voltage Testers | Electrical Safety Testers | Scanners and Matrix Systems
Configure the Test Enclosure Around Your DUT
Test space, contacting, interchangeable adapters, and integrated instruments define the setup. We configure the HVEx00 around your DUTs, cycle times, and safety requirements.
Variants
Specifications
| Permissible operating voltage | maximum 10 kV throughout the usable test space at installation altitudes up to 2,000 m above sea level |
|---|---|
| Standards compliance | EN 50191 and EN 61010-1 |
| Safety switch | Schmersal AZM161 with guard locking |
| Safety Box | additional safety circuit for Performance Level e; a 3 mA current limit is installed in the tester as standard |
| Usable test space | 450 × 460 × 500 mm or 750 × 460 × 500 mm |
| Pollution degree | 1 |
| Material | light gray and transparent PVC |
| Replaceable adapter plate | optionally available with a changeover interface or interchangeable adapter cassette |
| Integrated changeover system | available for the HVE600EC and HVE900EC models |
| Wiring space | approximately 100 mm in height beneath the interchangeable plate |
| Customer-side connection | C18 appliance inlet, 230 V AC, 50 Hz, 10 A |
| Hood mechanism | gas springs and ball bearings designed for high cycle counts |
| Tester selection | based on the required test-cage measurement functions |
Options & Accessories
| System power supply | with emergency-stop functionality |
|---|---|
| Mobile base cabinet | with a 19-inch mounting area for test instruments, scanners, and PCs |
| Switching matrices and multiplexers | HV and HC switching matrices and high-current multiplexers |
| Mounting system for ATX changeover kits | with MMIWK pylon interface |
| Red/green signal light | mounted in the test hood within the operator’s field of view |
| Operator control and monitor unit | mounted, for example, on a side arm or on the test hood with a keyboard drawer |
| PC integration | integrated PC or connection to an external PC |
| Test software | LXinstruments test software |
| Identification system | barcode or QR code reader |
| DUT fixturing and interchangeable adapter interfaces | customized and available for higher voltages upon request |
| Safety compliance test solution | customized system comprising a test hood, mobile base cabinet, and selected extensions |
| CE-compliant complete solution | supplied as a fully coordinated system |
Scope of Delivery
| HVEx00 Series high-voltage test hood(s) |
Applications
| Insulation test |
| Functional test under high voltage |
| Partial discharge measurement |
| Type test according to standard |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
LXinstruments GmbH was originally founded in 2006 as a solution provider for all issues relating to instruments and systems for electronic measurement technology. Our systems are primarily based on the LXI standard (Lan based Extensions for Instrumentation), an open industry standard. The portfolio was successively expanded to include device solutions.
Similar Items
LX-HVE900