Skip to main content Skip to search Skip to main navigation
For professionals (EU) | All data subject to change

Leakage current tester | AC, DC, AC + DC

Product information "Leakage current tester | AC, DC, AC + DC"

GW Instek GW-GLC-9000
Leakage Current Tester
AC, DC, AC + DC, AC Peak, EUT, Meter Mode, RS-232, GPIB, USB, Ext I/O, 5 kg

Features of the leakage current tester GLC-9000

  • Suitable for measuring leakage currents in medical and general electrical equipment
  • Touch panel with colour LCD display
  • 9 different measurement networks to simulate the resistance of the human body
  • 50 sets of preset test conditions comply with IEC 60990; 30 sets of memory for custom settings
  • 8 different types of leakage current for general electrical and medical equipment
  • Measuring device function with SELV/CONV function
  • Upper and lower limit for PASS/FAIL assessment
  • Different leakage current measurement modes: DC/AC/AC+DC/AC Peak
  • Various standard interfaces: RS-232C/GPIB/USB Host & Device/EXT I/O

The leakage current tester GLC-9000

The GLC-9000 leakage current tester is used to perform leakage current tests (or touch current tests) on medical electrical (IEC 60601-1) and general electrical and electronic (IEC 60990) equipment. This tester uses nine measuring networks (or meters) to simulate the human body while the equipment to be tested performs a leakage current test according to specific standards or regulations such as IEC, UL, JIS, etc. To create a simple operating environment, the GLC-9000 is equipped with a large TFT LCD touch panel that configures the system and displays the measurement settings and results simultaneously. In addition, there are 50 preset test conditions that comply with IEC60990 and other standards for general electrical equipment that can be recalled to reduce setup time. In addition, 30 sets of empty memory are defined for users.

A meter mode is also available for the GLC-9000, it uses the measuring terminal (T1/T2) to measure the voltage as the same way of normal voltmeter. During the voltage measurement, the SELV (safety extra low voltage) function is applicable to detect the voltage value between the measuring points whether it exceeds the SELV setting.

Scope of supply of GKT-008

  • Device
  • GTL-117: Measuring cable x 2, crocodile clips x 4
  • Foil test pad
  • User manual
  • Calibration certificate

Related links to "Leakage current tester | AC, DC, AC + DC"

Available documents (Subject to change)

Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.