Multi-Channel High-Voltage Amplifier, 1/2-Channel, DC >500 kHz…1.5 MHz | Tabor 9100/9200 Series
€4,000.00*
€4,000.00*
Prices plus VAT plus shipping costs
Downloads (Subject to change)
Product Information "Multi-Channel High-Voltage Amplifier, 1/2-Channel, DC >500 kHz…1.5 MHz | Tabor 9100/9200 Series"
Tabor 9100/9200 Series
High-Voltage Signal Amplifiers with Multichannel Architecture
Professional high-voltage technology for demanding test environments
The high-voltage signal amplifiers of the Tabor 9100/9200 Series are not standard laboratory instruments. They are purpose-built interfaces between signal generators and the device under test.
They amplify complex signal waveforms with low loss and minimal distortion into extended voltage ranges, making them ideal for demanding test and measurement applications.
The 9100/9200 Series is positioned as a precise amplifier platform for professional test environments in development, laboratory use, and quality assurance.
Measurement reliability with complex signal waveforms
The devices of the Tabor 9100/9200 Series enable reproducible HV tests, even with dynamic signal profiles. Their amplifier architecture is optimized for maximum signal integrity and reliably preserves waveform shape and timing.
This creates a key prerequisite for reliable results in electrical safety testing, compliance testing, and development tasks. Test and verification engineers reduce measurement uncertainty, simplify test setups, and increase the reliability of their test results with the Tabor 9100/9200 Series signal amplifiers.
Clearly focused operating concept for high-voltage testing
As active high-voltage signal amplifiers, the devices of the 9100/9200 Series operate directly with function and arbitrary waveform generators and integrate seamlessly into existing test systems. Safety mechanisms and galvanic isolation support controlled, standards-compliant operation in HV tests, insulation testing, and application-specific test systems—from development laboratories to automated quality assurance.
Your advantages with the Tabor 9100/9200 Series
With the Tabor 9100/9200 Series, users rely on a specialized amplifier platform designed for precision, operational safety, and system integration.
The devices deliver clear added value in high-voltage and broadband applications and provide a reliable foundation for reproducible test processes in development, testing, and quality assurance.
Contact us now – we work with you to design the right test system for your application.
| Bandwidth: | DC bis >500 kHz |
|---|---|
| Channels: | 1, 2 |
| Output Voltage: | 300 Vpp, 400 Vpp |
| Verstärkung (Gain): | x15, x50 |
Related links to "Multi-Channel High-Voltage Amplifier, 1/2-Channel, DC >500 kHz…1.5 MHz | Tabor 9100/9200 Series"
Available documents (Subject to change)
Features and Specifications of the High-Voltage Signal Amplifier Tabor 9100/9200 Series
-
Number of channels
- 9100, 9100A: 1-channel
- 9200, 9200A: 2-channel
-
Max. output voltage (Vp-p)
- 9100, 9200: up to 300 Vp-p
- 9100A, 9200A: up to 400 Vp-p
-
Max. output current
- 9100: up to 150 mA
- 9100A: up to 125 mA
- 9200, 9200A: up to 100 mA per channel
-
Full power bandwidth
- 9100, 9200, 9100A, 9200A: DC to 500 kHz (full power)
- 9200A (unipolar): DC to 200 kHz
-
Gain (fixed)
- 9100, 9200: ×15
- 9100A, 9200A: ×50
-
Input (impedance / coupling)
- 9100, 9200: 1 MΩ, DC-coupled
- 9100A, 9200A: 1 MΩ, DC-coupled
-
Input (allowable level)
- 9100, 9200: damage level up to 50 Vp-p
- 9100A, 9200A: amplitude level up to 8 Vp-p
-
Output (source impedance)
- 9100, 9200, 9100A, 9200A: 0.1 Ω
-
Protection functions
- 9100, 9200, 9100A, 9200A: short-circuit protected (up to 10 s)
-
Monitor output (rear panel)
- 9100A, 9200A: yes
- 9100, 9200: no
-
Monitor ratio
- 9100A, 9200A: 100:1
- 9100, 9200: –
-
Unipolar mode
- 9200A: yes
- 9100, 9200, 9100A: no
-
Signal ground / floating
- 9100, 9200: selectable (G = grounded, F = floating)
- 9100A, 9200A: floating up to 250 VDC (referenced to source level)
-
Slew rate
- 9100, 9200: up to 200 V/µs
- 9100A, 9200A: up to 400 V/µs
-
Form factor
- 9100, 9200: 2U, half-rack (bench-top)
- 9100A, 9200A: 2U, half-rack
-
Standards / compliance
- CE
- IEC 61010-1
-
Safety concept (A models)
- 9100A, 9200A: HV enable via mechanical switch and safety latch
- 9100, 9200: –
Options and Accessories of the High-Voltage Signal Amplifier Tabor 9100/9200 Series
- S-rack mount: 19-inch rack mounting kit (single unit)
- D-rack mount: 19-inch rack mounting kit (two units)
- Case kit: Professional carry case
Model-dependent options
- Custom gain variants: Available on request
- Selectable signal ground: Grounded or galvanically isolated (floating)
Scope of Delivery of the High-Voltage Signal Amplifier Tabor 9100/9200 Series
- Tabor 9100/9200 Series unit(s)
- Power cable
- User manual
- Calibration certificate
Application Examples of the High-Voltage Signal Amplifier Tabor 9100/9200 Series
- High-voltage testing and HV tests in quality assurance
- Insulation and safety testing of electronic assemblies
- Development and verification of power electronics
- Test systems for sensor, actuator, and MEMS applications
Since its founding in 1971, Tabor Electronics has become a world-leading supplier of world-class measurement and test equipment. Tabor has earned this reputation through both quality craftsmanship and innovative engineering. Its broad portfolio includes hardware products such as pulse, function and arbitrary waveform generators, as well as high-voltage, signal and digital amplifiers. Platforms based on different frequency ranges are complemented with waveform or modulation software. Technologically leading, Tabor offers the best combination of performance, reliability and price/performance ratio. Tabor products are used in a wide range of applications, in industry and research.