Skip to main content Skip to search Skip to main navigation
For professionals (EU) | All data subject to change

Programmable Bidirectional DC Power Supply

Kewell D2000-EV: DC Power for Battery Testing and Power Electronics

Whether testing batteries, DC/DC converters, or other power electronic components, the Kewell D2000-EV Series provides programmable DC voltage and current with bidirectional power flow. Absorbed energy is fed back into the utility grid instead of being entirely dissipated as heat. This allows different operating conditions to be tested under controlled conditions.

For dynamic testing, the series combines high DC power with rapid voltage and current changes. SiC power semiconductors enable high power density and efficient operation. Depending on the model, power ratings of up to 600 kW and output currents of up to 1,200 A are available. The NG, PG, and Ultra versions differ in measurement accuracy, dynamic performance, and features. While all versions support battery simulation, PG and Ultra also provide a regenerative electronic DC load.

Alternative Products

If your DC testing requires a higher voltage range, the Kewell D2000-IV Series offers up to 2,000 V with power ratings of up to 600 kW. For lower-power testing applications from 15 to 30 kW, the Kewell S7200 Series provides a bidirectional DC power supply with a regenerative electronic load.

Related Product Categories

Bidirectional Devices | Electronic Loads | Power Supplies and Sources

Bidirectional power for your EV tests

Planning battery, motor controller or load tests up to 600 kW? We support you in selecting, configuring and integrating the right D2000-EV solution.

Variants

Filter products

Specifications

Device Function Bidirectional programmable DC power supply with regenerative electronic DC load capability and grid power feedback
Versions
  • Normal (NG) - Bidirectional DC power supply with battery simulation, no electronic DC load function, manual circuit breaker, 100 to 500 kW
  • Pro (PG) - Bidirectional DC power supply with battery simulation and electronic DC load function, electrically operated circuit breaker, 100 to 600 kW
  • Ultra (UG) - Bidirectional DC power supply with battery simulation and electronic DC load function, electrically operated circuit breaker, 200 to 600 kW
Output Current Up to 1200 A
Rated Power Up to 600 kW
Interfaces LAN, CAN, RS485
Grid Voltage 380 V ±15%
Grid Frequency 47 to 63 Hz
Operation Via 7-inch TFT touchscreen

Options & Accessories

PA1070-AL-T3 Three-Color Alarm Light
PA1070-SR-T0 Switching Resistor 18 Ω
PA1070-SR-T1 Switching Resistor 9 Ω
PA1070-SR-T2 Switching Resistor 7.2 Ω
PA1070-SR-T3 Switching Resistor 3.6 Ω
PA1070-SR-T4 Switching Resistor 2.4 Ω
PA1070-PO-T0L Parallel Connection Kit for 2 Devices Including 2 × 3 m Fiber-Optic Cables
PA1070-PO-T1L Parallel Connection Kit for 2 Devices Including 2 × 6 m Fiber-Optic Cables
PA1070-PO-T4L Parallel Connection Kit for 3 Devices Including 4 × 3 m Fiber-Optic Cables
PA1070-PO-T5L Parallel Connection Kit for 3 Devices Including 4 × 6 m Fiber-Optic Cables
PA1070-PO-T6L Parallel Connection Kit for 4 Devices Including 4 × 3 m Fiber-Optic Cables
PA1070-PO-T7L Parallel Connection Kit for 4 Devices Including 4 × 6 m Fiber-Optic Cables
PA1070-ID-T3 Insulation Monitoring for Models with Voltages Below 1500 V, Bender Insulation Monitoring Device

Scope of Delivery

Unit(s) of the D2000-EV-Series
Power cord
Operating manual

Applications

Device Kewell D2000-EV in the ordered version
Circuit Breaker Lock Normal Version (NG) only
USB Flash Drive (32 GB) Includes Kewell software package; software license provided free of charge by the manufacturer
Ethernet Cable 10 m length

Links & Downloads

Supplier

Kewell Technology Co, Ltd, founded in 2011, is a pioneering manufacturer of intelligent manufacturing equipment and testing solutions for various industries.

The product lines are divided into the following areas:

  • Power supplies for test systems
  • Hydrogen energy test equipment and intelligent manufacturing equipment
  • Power semiconductor and production line test systems

Skip product gallery

Similar Items

Bidirectional and regenerative DC power supply for test and measurement systems from ITECH
ITECH IT6000C | Bidirectional, Regenerative DC Power Supply

IH-IT6108C-300-1350


Power max. 144 kW, Voltage 0 - 2250 V, Current 0 - 2040 A

Price on request

Prices plus VAT
Programmable Bidirectional DC Power Supply with Integrated DC Load from Kewell S7200
Kewell S7200 | Bidirectional DC Power Supply & Load

KW-S7200NG-15K-1200-100


Bidirectional Programmable AC Power Supply, Voltage range: 0 - 450 V, Current: up to 342 A, Power: up to 225 kW

Price on request

Prices plus VAT