Associated Research OMNIA II 82xx | Electrical Safety Tester
Bundle Hipot, Ground Bond, and Functional Run Tests in one guided workflow for safer release decisions in EOL testing without process breaks.
- ✓ 5 kV AC / 6 kV DC
- ✓ 40 A Ground Bond
- ✓ Functional Run & Leakage Current
Electrical Safety Testers for Hipot, Ground Bond, and EOL Testing
Associated Research 82xx-Series OMNIA II: Electrical Safety Testing in Production, End-of-Line Testing, and Test Labs
The Associated Research 82xx Series OMNIA II is a model range for electrical safety testing on products and assemblies in production, end-of-line testing, and test labs. The electrical safety testers are designed as Electrical Safety Compliance Analyzers and combine AC Hipot, DC Hipot, Ground Bond, Ground Continuity, insulation resistance, leakage current measurement, and Functional Run Test in a guided test sequence. Typical test points include insulation, protective earth connection, leakage current paths, and electrical operating values on the powered DUT.
Hipot, Protective Earth Testing, and Functional Testing in One Test Process
The models of the Associated Research 82xx OMNIA II Series support test stations where products must not only withstand voltage stress but also operate safely under powered conditions. For dielectric withstand testing, test voltages of up to 5 kV AC and 6 kV DC are available. Ground Bond testing is performed with test currents of up to 40 A. This allows dielectric breakdown, leakage current, insulation resistance, and protective earth resistance to be evaluated in a documented test program.
Technical Functions for Safe High-Voltage Testing
During high-voltage testing, manufacturer-specific functions help make the process safer and easier to control. SmartGFI shuts down the HV output in the event of dangerous fault current, while Remote Safety Interlock integrates external safety switches. Charge-LO checks the DUT connection before high voltage is applied. FailCHEK verifies failure detection in the test setup, while DualCHEK combines Hipot and Ground Bond in a single test step.
Selection Based on Test Type, DUT Power, and Automation
The choice of the right variant of the Associated Research 82xx Series OMNIA II depends on the test task, DUT power requirements, and integration into the test system. 8204/8254 cover Hipot, Ground Bond, continuity, and insulation resistance. 8206/8256 add Run Test and Leakage Current. 8207/8257 also provide an integrated AC power source. For automated test stations, USB and RS-232 are available; Ethernet, GPIB, and multiplexers can expand integration for multi-point testing.
Alternative Products
If Functional Run and Leakage Current testing are not required, the Associated Research Hypot 38xx is a more compact solution for AC/DC Hipot and insulation resistance testing. For extended Hipot, insulation resistance, and Ground Bond testing without functional testing, the Associated Research HypotULTRA 78xx is a suitable choice. For dedicated high-current Ground Bond testing, the Associated Research HYAMP 3240 is the matching addition.
Related Product Categories
Safety Tester | Hipot / High Voltage Tester | Ground Bond Tester | Scanner / Matrix
Make Electrical Safety Testing Fit Your Workflow
Clarify which OMNIA II variant combines Hipot, Ground Bond, Leakage Current, and Functional Run testing best for your DUTs and EOL process.
Variants
Specifications
| AC Hipot | Voltage Output = 5000 V AC, Leakage Current Limits = 100 mA, Output Frequency = 50/60 Hz |
|---|---|
| DC Hipot | Voltage Output = 6000 V DC, Leakage Current Limits = 20 mA, DC Ripple ≤ 4 % |
| Ground Bond |
|
| Insulation Resistance | Voltage Output = 30 V - 1000 V DC, Resistance Range = 0.05 MΩ - 50.0 GΩ |
| Safety Features | Safety Interlock, SmartGFI® |
| Productivity | PLC Remote Inputs and Outputs, Low-Current Sense, Electronic Ramping, Arc Detection, FailCHEK®, Cal Alert®, Prompt and Hold, Ramp-HI®, Charge-LO®, DualCHEK®, 4-Wire Kelvin Measurement |
| Warranty | 5 Years |
| OMNIA® II 8254, 8256 and 8257 | AC Hipot 500 VA meets the requirements for 200 mA short-circuit current |
| OMNIA® II 8204, 8206 und 8207 | AC Hipot are EN 50191 compliant |
Scope of Delivery
| OMNIA II Instrument |
| Interlock Connector Male |
| Input Power Cable USA |
| High Voltage Lead 5 FT |
| USB Cable |
| 3U Rack Mount Bracket |
| 3U Rack Mount Handle |
| Rack Mount Handle Screws |
| Fuse |
| 40 Amp High Current Lead 5 FT |
| 40 Amp High Current Return Lead 5 FT |
| 40 Amp High Current Return Lead 10 FT |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
For more than seven decades Associated Research has shaped the electrical safety compliance industry with innovative test and measurement solutions. Associated Research strives to improve all aspects of the electrical safety testing process for customers through dedication to product quality and commitment to customer satisfaction. Since being incorporated in 1936 AR has remained family owned, and continues to make business decisions with the values of the founder in mind. Due to their strong and lasting relationships with customers, Associated Research instruments are found in leading manufacturing and laboratory environments around the globe.
Their customer base includes companies from the following industries: consumer electronics, contract manufacturers, appliance, solar, motor, lighting products, medical products, and cable manufacturers. Associated Research stands behind their products and provide excellent service and support. At Associated Research, electrical safety compliance testing is the only focus.
Suitable for the following items...
AR-SC6540-Series
Price on request
AR-WS-TMS
Price on request