VTI EX1400 | 16-Channel LXI System for DAQ and Data Logging
Capture signals close to the DUT and deliver synchronized test data for automated systems—with less cabling effort.
- ✓ 16 channels per module
- ✓ up to 128 kSa/s per channel
- ✓ up to ±420 V peak
LXI Measurement Acquisition (DAQ) for Synchronized Measurement Data
VTI EX1400: Short Signal Paths for Precise Measurement Data
The VTI EX1400 Series brings 16-channel data acquisition closer to the sensor, DUT, and measurement point. This shortens analog signal paths and reduces interference. The digitized measurement data is streamed via Ethernet, time-synchronized via IEEE-1588-v2 PTP, and integrated into predefined measurement sequences using triggers.
EX1401: Capture Thermocouples and Low Voltage
The EX1401 is designed for thermocouples and isolated voltage signals up to ±10 V. It measures differentially, with a dedicated 24-bit A/D converter per channel and channel-specific cold junction compensation for thermocouple measurements. This makes it suitable for temperature profiles and low-voltage measurements close to the DUT.
EX1402: Isolated High-Voltage Data Acquisition
The EX1402 measures galvanically isolated voltages up to ±420 V peak. Via differential inputs, it covers the ranges ±1 V, ±10 V, and ±420 V peak at up to 128 kSa/s per channel. It measures voltage, but does not generate test voltage and does not replace a hipot tester.
EX1403A: Capture Strain Gauge, Bridge, and RTD Signals
The EX1403A is designed for strain gauges, measurement bridges, RTD, resistance, and voltage signals. Bridge excitation, bridge completion, shunt calibration, and TEDS support structural testing and sensor validation. It is not intended for galvanically isolated high-voltage measurements.
LXI-DAQ for Recording and Integration Into Test Systems
The VTI EX1400 Series can record measurement sequences, but it is designed for more than simply storing measurement data. Unlike a classic data logger, it is an LXI-DAQ system for automated test systems. Measurement data is not only stored, but is also available for control, analysis, and further test sequences.
Alternative Products
If your setup requires a modular benchtop DAQ, a multi-channel LXI acquisition system, or a switch-and-measure mainframe instead of the VTI EX1400 Series, suitable alternatives include the DAQ-9600 Series, multi-channel LXI data acquisition, EX1000A Series, or the EX1200 Series.
Related Product Categories
Data Loggers (DAQs) | LXI / PXI Systems | Test Systems | Transducers
Secure 20% Off When Buying Two or More EX1400 Units
More measurement points, less effort: combine EX1401, EX1402, and EX1403A to match your test setup and benefit from 20% off when purchasing two or more units.
(Promotion valid until September 30, 2026)
Variants
Specifications
| Channels | 16 analog measurement channels per module |
|---|---|
| Measurement Types per Module |
|
| Voltage Ranges per Module |
|
| Sample Rate per Module |
|
| ADC per Module |
|
| Isolation per Module |
|
| Input Connector per Module |
|
| Thermocouple Types EX1401 | J, K, T, E, S, R, B, N |
| Bridge Types EX1403A | full bridge, half bridge, quarter bridge |
| Bridge Completion EX1403A | 120 Ω, 350 Ω, 1 kΩ |
| Bridge Excitation EX1403A | 0.5 V to 10 V |
| Current Excitation EX1403A | 0.46 mA |
| Resistance Ranges EX1403A | 200 Ω, 2 kΩ, 20 kΩ |
| Interface | LXI Ethernet |
| Synchronization | IEEE-1588-v2 PTP and external 10 MHz clock |
| Trigger | external clock and trigger inputs |
| Digital I/O | 8-bit bank-isolated digital I/O |
| Data Streaming/Recording | stream over Ethernet and/or stream to USB |
| Form Factor | 1U half-rack format |
Options & Accessories
| 56-0739-120R | AC/DC Power Supply, 120 W, PSE Certified |
|---|---|
| 56-0739-000R | AC/DC Power Supply, 60 W |
| 70-0626-900R | Rack Mount Kit EX14XX-RK001 |
| 41-0620-015R | Rack Mount Filler Panel |
Scope of Delivery
| Device(s) of the EX1400 Series |
| VTI Instruments driver and manual CD |
| External power adapter, model-dependent |
| Grounding cable, model-dependent |
Applications
| Battery and fuel cell test |
| Thermal data acquisition |
| Gas turbine test |
| HALT/HASS |
| In-vehicle automotive test |
| Electric motor test |
| Wind tunnel evaluation |
| Health monitoring |
| Airframe structural and fatigue test |
| Rocket and satellite structural test |
| Wind tunnel flight load test |
| General purpose bridge measurements |
| Load frame materials testing |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
VTI Instruments, headquartered in San Diego, develops measurement, switching, and data acquisition systems for monitoring and testing technically demanding components. Its systems are used in applications such as aircraft, engine, and structural testing, as well as automated functional testing of electronic assemblies.
The company is one of the leading providers in this field and is known for delivering precise, reliable measurement data even under demanding operating conditions.
Similar Items
GW-DAQ-9600
VT-EX1202
Price on request
VT-LXI-Datenlogger
Price on request
VT-EX1000A-Serie
Price on request