High Power DC Electronic Load | PEL-5000C
Price on request
Price on request
Prices plus VAT plus shipping costs
Downloads (Subject to change)
Product information "High Power DC Electronic Load | PEL-5000C"
GW Instek PEL-5000C Series
High Power DC Electronic Load
GW Instek PEL-5000C series single-channel electronic load provides 150 V / 600 V / 1200 V models with a power range up to 24 kW. The series has a total of 24 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations, electric vehicle batteries and solar panels. With the same voltage, up to 8 units with different output power can be connected in parallel. This means that a maximum output of up to 192 kW is possible..
For battery testing, PEL-5000C series specifically offers four selectable battery discharge modes: CC+CV, CP+CV, CC+ UVP and CP+ UVP test mode. In addition to the four battery discharge modes, PEL-5000C also provides Time period discharge, Pulse discharge, and RAMP discharge modes. Users can set the discharge time, or discharge in the pulse current mode, or even set the rising/falling slew rate of the discharge current. These functions are very useful in simulating the discharge current curve of vehicle batteries.
In order to meet the verification requirements of different DUTs, the PEL-5000C series provides a variety of test functions, including inrush current test mode, solar panel MPPT (Maximum Power Point Tracking) test mode, automated OCP, OPP test functions and 150 sets of parameter storage function. The 1200 V model not only provides full power output at 1000 V, but also provides 60% power output at 1200 V. High-voltage batteries or chargers directly connected to the electronic load may cause damage to the electronic load. PEL-5000C series has a built-in slow starter, which not only protects the DC load, but also saves the user's installation cost and setting time for measurement.
Features of the High Power DC Load PEL-5000C Series
- Up to 8 units in master/slave parallel control with power up to 192 kW
- 5-digit digital voltage, current and power meter
- Large LCD Display
- Display voltage value, current value, watt value at the same time
- Suitable for power factor regulator (PFC) testing (not with 150 V model)
- Automatically perform OCP, OPP test
- The power-on state value can be set
- CC, CR, CV, CP, CC+CV, CP+CV, dynamic and short circuit modes
- Short circuit time can be set during short circuit test
- Over current, over power, over temperature protection and over voltage warning
- Voltage polarity display can be set to positive value ("+") or negative value ("-")
- Support solar panel MPPT test
- Optional interfaces: GPIB, RS232, USB, LAN
Available Models of the High Power DC Load PEL-5000C Series
| Model | Voltage, Current, Power |
| PEL-5006C-150-600 | 150 V, 600 A, 6 kW |
| PEL-5008C-150-800 | 150 V, 800 A, 8 kW |
| PEL-5010C-150-1000 | 150 V, 1000 A, 10 kW |
| PEL-5012C-150-1200 | 150 V, 1200 A, 12 kW |
| PEL-5015C-150-1500 | 150 V, 1500 A, 15 kW |
| PEL-5018C-150-1800 | 150 V, 1800 A, 18 kW |
| PEL-5020C-150-2000 | 150 V, 2000 A, 20 kW |
| PEL-5024C-150-2000 | 150 V, 2000 A, 24 kW |
| PEL-5006C-600-420 | 600 V, 420 A, 6 kW |
| PEL-5008C-600-560 | 600 V, 560 A, 8 kW |
| PEL-5010C-600-700 | 600 V, 700 A, 10 kW |
| PEL-5012C-600-840 | 600 V, 840 A, 12 kW |
| PEL-5015C-600-1050 | 600 V, 1050 A, 15 kW |
| PEL-5018C-600-1260 | 600 V, 1260 A, 18 kW |
| PEL-5020C-600-1400 | 600 V, 1400 A, 20 kW |
| PEL-5024C-600-1680 | 600 V, 1680 A, 24 kW |
| PEL-5006C-1200-240 | 1200 V, 240 A, 6 kW |
| PEL-5008C-1200-320 | 1200 V, 320 A, 8 kW |
| PEL-5010C-1200-400 | 1200 V, 400 A, 10 kW |
| PEL-5012C-1200-480 | 1200 V, 480 A, 12 kW |
| PEL-5015C-1200-600 | 1200 V, 600 A, 15 kW |
| PEL-5018C-1200-720 | 1200 V, 720 A, 18 kW |
| PEL-5020C-1200-800 | 1200 V, 800 A, 20 kW |
| PEL-5024C-1200-960 | 1200 V, 960 A, 24 kW |
| AC / DC: | DC |
|---|---|
| Bidirectional: | no |
| Interfaces: | GPIB , LAN , RS232 , USB |
| Output Channels: | 1 |
| Regenerative: | no |
| Working Mode: | CC - Constant Current , CP - Constant Power , CR - Constant Resistance , CV - Constant Voltage |
Related links to "High Power DC Electronic Load | PEL-5000C"
Available documents (Subject to change)
Optional Accessories of High Power Compact DC Load of PEL-5000C Series
| PEL-022 | GPIB Card |
| PEL-023 |
RS-232 Card |
| PEL-024 |
LAN Card |
| PEL-025 |
USB Card |
| PEL-026 |
Hook Ring × 4 |
| PEL-027-1 |
Rack Mount Kit For PEL-5006C |
| PEL-027-2 | Rack Mount Kit For PEL-5008C, PEL-5010C, PEL-5012C |
| PEL-027-3 | Rack Mount Kit For PEL-5015C, PEL-5018C |
| PEL-027-4 | Rack Mount Kit For PEL-5020C, PEL-5024C |
| PEL-028 |
HANDLES, U-shaped handle (fixed to the bracket) |
| PEL-030 |
GPIB+RS-232 Card |
| GTL-248 |
GPIB Cable, 2m |
| GTL-250 |
GPIB Cable, 0.6m |
| GTL-246 |
USB Cable, 1.2m |
Standard Accessories of High Power Compact DC Load of PEL-5000C Series
HD-DSUB 15PIN Parallel wire
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.