GW Instek ASR-2000 | Programmable AC/DC Power Source
Test components and devices under defined AC/DC conditions while reproducing mains disturbances, voltage changes, and inrush events reliably.
- ✓ Up to 350 Vrms AC and ±500 V DC
- ✓ Up to 999.9 Hz Output Frequency
- ✓ 500 or 1000 VA Output Power
Programmierbare AC/DC-Netzgeräte für Netzstörungs- und Eingangstests
AC-, DC- und AC+DC-Versorgung für Prüflinge
Die Geräte der GW Instek ASR-2000-Serie speisen elektronische Baugruppen, Fahrzeugelektronik und Haushaltsgeräte mit Wechselspannung, Gleichspannung oder kombiniertem AC+DC-Ausgang. Je nach Betriebsart stehen bis zu 350 Veff AC beziehungsweise ±500 V DC und Frequenzen bis 999,9 Hz bereit. Gleichzeitig messen sie Spannung, Strom sowie Wirk-, Schein- und Blindleistung.
Netzereignisse, Einschaltstrom und Oberschwingungen
Netzausfälle, Spannungsanstiege, Spannungsabfälle oder Frequenzänderungen gibt der Simulate Mode vor. Für mehrere Zustände in fester Folge setzt der Sequence Mode programmierte Schritte zeitlich um; eigene Spannungsverläufe lassen sich als Arbiträrwellenform speichern und abrufen. Ipk Hold hält den höchsten Einschaltstrom fest, während die Oberschwingungsanalyse Spannungs- und Stromanteile bis zur 100. Ordnung auswertet.
Externe Signale und Spannung am Prüfling
Externe AC- oder AC/DC-Signale können den Ausgang steuern, das intern erzeugte Signal überlagern oder zur Synchronisation dienen. Bei langen Anschlussleitungen misst Remote Sense direkt am Prüfling und gleicht Spannungsabfälle bis zu fünf Prozent der Ausgangsspannung aus. Phasenwinkel und Anstiegsgeschwindigkeit legen den Ein- und Ausschaltverlauf fest.
Leistung, Bauform und Schnittstellen
ASR-2050 und ASR-2050R liefern 500 VA, ASR-2100 und ASR-2100R 1000 VA. Die Standardausführungen sind Tischgeräte, die R-Modelle für 3U-Halbrack-Systeme. Da die Geräte als AC/DC-Quellen arbeiten, eignen sie sich für Prüflinge ohne Energierückspeisung; bei rückspeisenden Anwendungen ist eine bidirektionale Geräteklasse erforderlich. USB, LAN und externe Steuer-E/A sind serienmäßig, RS-232C und GPIB optional. Für die Auswahl zählen damit Leistung, Strombereich, Bauform und Systemanbindung.
Alternative Produkte
Wer ausschließlich AC-Eingangstests bis 1000 VA durchführt, findet in der GW Instek APS-7000E-Serie eine lineare AC-Quelle. Soll der Prüfling Energie zurückspeisen oder werden Quellen- und Lastbetrieb in einem Gerät benötigt, kommt die Kewell G6000-Serie infrage. Für regenerative Netzsimulationen in höheren Leistungsklassen steht die ITECH IT7900P-Serie bereit.
Passende Produktbereiche
Netzgeräte und Quellen | Elektronische Lasten | Bidirektionale Geräte
Recreate the Power Conditions Your DUT Must Survive
From voltage dips and frequency shifts to AC+DC overlays and inrush current, we help match power rating, form factor, and interfaces to your test setup.
Variants
Specifications
| Specification | Value |
|---|---|
| Output Voltage Range | AC up to 350 Vrms, DC up to ±500 V |
| Output Frequency Range | Up to 999.9 Hz |
| Measurement Parameters | Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF and CF |
| Harmonic Analysis | Analysis of voltage and current harmonics including THDv and THDi |
| Remote Sense | Voltage measurement directly at the DUT to compensate for voltage drops across the connection cables |
| Protection Functions | OVP, OCP, OPP, OTP, AC power failure detection and fan failure alarm |
| Arbitrary Waveform Function | Output of user-defined voltage waveforms |
| Output Power Rating | 500 VA or 1000 VA |
| Phase Angle Control | User-defined phase angle when switching the output on or off |
| Sequence and Simulation Functions | Up to 10 storable sequences |
| Standard Interfaces | USB, LAN and RS-232 |
| Optional Interface | GPIB |
| External Control Connections | Control I/O and signal input |
| Output Relay Control | Built-in output relay control |
| Settings Memory | Up to 10 memory locations |
| Web Server | Built-in web server for remote access and operation |
Options & Accessories
Factory-Installed Accessories
| Manufacturer Number | Name |
|---|---|
| ASR-GPIB-2K | RS-232C and GPIB Interface Option |
| ASR-EU-2K | European Output Socket for ASR-2050 and ASR-2100 |
Optional Accessories
| Manufacturer Number | Name |
|---|---|
| GET-003 | External Universal Socket for ASR-2000R |
| GET-004 | External European Socket for ASR-2000R |
| GRA-439-E | Rack-Mount Kit to EIA Standard |
| GRA-439-J | RS-232C Cable, Approx. 2 m |
| GTL-258 | GPIB Cable, Approx. 2 m, with 25-Pin Micro-D Connector |
| ASR-001 | Air Inlet Filter |
| ASR-002 | External Three-Phase Control Unit for Three Identical Instruments |
| ASR-C003 | Modbus TCP Function Enablement |
Scope of Delivery
| Scope of Delivery |
|---|
| User Manual and Programming Manual |
| Power Cord |
| Terminal Cover Set for Mains Connection Terminals |
| Terminal Cover Set for Remote Sense Terminals |
| GTL-123 Test Lead |
| GTL-246 USB Cable |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.