Single-Channel DC Electronic Load | PEL-500 Series
€1,134.00*
€1,134.00*
Prices plus VAT plus shipping costs
Product Information "Single-Channel DC Electronic Load | PEL-500 Series"
GW Instek PEL-500 Series
DC Programmable Electronic DC Load
Voltage: 0-500 V, Power: 250-700 W
Programmable electronic DC load for development and production
The GW Instek PEL-500 series is a programmable electronic DC load for professional testing and measurement applications. It supports development departments, quality assurance, and manufacturing in the reliable testing of modern power supplies, DC sources, and electronic assemblies. Thanks to its flexible design, the series is suitable for both manual test stations and use in automated test systems.
Versatile applications in power electronics
The PEL-500 series covers a wide range of typical test tasks – from development and laboratory tests to series and end-of-line tests. It is used, among other things, for testing power supplies, switching regulators, and current sources, and supports transient and steady-state tests as well as battery simulations and battery discharge tests. This allows real load conditions to be accurately reproduced and the behavior of the device under test to be reliably evaluated.
Intelligent test functions and safe test sequences
Integrated test functions such as surge test, short-circuit test, and automatic tests of overcurrent and overpower protection significantly simplify safety-related tests. The GO/NG function enables clear pass/fail decisions and supports reproducible results in quality assurance.
Clear operation and comprehensive device protection
Voltage, current, and power can be clearly recorded at any time. Protection functions such as overcurrent, overpower, overvoltage, and overtemperature protection, as well as reverse polarity detection, ensure safe operation and protect both the device under test and the test device.
Your solution for reliable DC load testing
Choose the GW Instek PEL-500 series if you are looking for a flexible, safe, and field-proven electronic load for demanding test tasks.
Contact us for expert advice or a customized quote!
Related links to "Single-Channel DC Electronic Load | PEL-500 Series"
Specifications of the Programmable Electronic DC Load - PEL-500 Series
- 5-digit digital measurement of voltage, current, and power
- Simultaneous display of voltage, current, and power
- Adjustable short-circuit duration for short-circuit tests
- Automatic overcurrent and overpower protection test function
- For battery discharge tests, discharge cut-off voltage (Vbatt), discharge capacity, and discharge stop time can be set
- Surge test simulates inrush current and transient current during plug-in
- Constant current, constant resistance, constant voltage, constant power, and dynamic modes
- Protection against overvoltage, overcurrent, overload, overtemperature, and reverse polarity
- Voltage polarity display selectable as positive (+) or negative (−)
- Communication interfaces: RS-232, USB
Options of the Electronic DC Load (Programmable) - PEL-500 Series
- GTL-246: USB cable for device interface
- GTL-238: RS-232 cable, 9-pin, type M–F, length 1000 mm
Scope of Delivery of the Programmable DC Load/Load Module - PEL-500 Series
- PEL-500 Series unit(s)
- Operating manual
- Power cord
Application Areas of the Programmable Electronic Load for DC Power Supplies - PEL-500 Series
- Voltage and current source testing
- Transient response of switching power supplies
- Constant voltage mode for current limiting tests and battery simulation
- Battery discharge
- Research and development, quality control
- ATE systems
- Production testing
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.