Bidirectional, Regenerative DC Power Supply | IT6000C Series
Price on request
Content:
1 piece
Price on request
Prices plus VAT plus shipping costs
This product is available in 56 versions.
Product number:
IH-IT6018C-1500-40
Downloads (Subject to change)
Product Information "Bidirectional, Regenerative DC Power Supply | IT6000C Series"
ITECH IT6000C Series
Bidirectional Regenerative DC Power Supply (Source and Sink)
Scalable Power up to 1.152 MW, Voltage up to 2250 V, Current up to 2040 A, 7U
When a Bidirectional DC Supply Is Needed
The IT6000C series is a bidirectional power supply designed for test and measurement systems where electrical energy must be charged and discharged in a controlled manner. It is used in applications where energy flows in both directions and the system operates as both a DC source and a DC load. This is typically required in tests where charging and discharging processes must be performed within a single test cycle without switching between separate power supplies and electronic DC loads.Source and Load in One System
In conventional test setups, DC sources and electronic DC loads are often implemented as separate devices. This increases system complexity, requires additional switching logic, and makes reproducible testing under dynamic operating conditions more difficult. The IT6000C series integrates source and sink functionality within a single bidirectional DC power supply, enabling continuous changes in energy flow within a test or simulation scenario without external switching components.When Regeneration Matters
The regenerative function of the IT6000C series becomes relevant when operating in load mode over extended periods or at high output power. In such tests—such as endurance or simulation testing—absorbed energy would otherwise be fully converted into heat. As a regenerative DC power supply, the IT6000C series feeds this energy back into the grid in a controlled manner.Tests Requiring Bidirectional Operation
Certain test scenarios can only be realized with significant additional effort when using conventional DC power supplies or separate DC loads. These include testing of energy storage systems, power electronic assemblies, or DC-coupled systems with recuperative operating modes. Simulating real operating profiles with alternating source and load conditions within a single test sequence also requires a bidirectional DC power supply with integrated control.DC Scope and System Alternatives
The IT6000C is used in DC test setups where energy flow on the DC side is precisely controlled and charging, discharging, and regenerative processes are part of the test logic. Functions for simulating AC grids or grid disturbances are outside the scope of this system. For test applications that only require a static DC supply, a conventional DC power supply is often the technically appropriate solution. For these and other tasks, we offer suitable programmable DC power supplies and support the selection of the most appropriate device.Technical Evaluation for Your Application
Describe the energy flow of your application, such as source and sink operation, charging and discharging phases, or continuous operation. We evaluate whether bidirectional operation and regenerative feedback are technically required and support the system design and integration of the appropriate solution.Related links to "Bidirectional, Regenerative DC Power Supply | IT6000C Series"
Available documents (Subject to change)
Specifications of the Bidirectional Regenerative DC Power Supply - IT6000C Series
- Power: up to 144 kW, expandable up to 1.152 MW by parallel connection
- Voltage output ratings: 0 - 2250 V
- Current output ratings: 0 - 2040 A
Options & Accessories for the Regenerative Bidirectional DC Power Supply System - IT6000C Series
- IT-E168 / IT-E169: Optical fiber kit for parallel operation
- IT-E165A-250A / 600A / 800A: Reverse polarity protection module
- IT-E165B: Anti-electromotive force (Anti-EMF) protection module
- SAR3000: Solar array simulation software
- FC8000: Single-channel fuel cell simulation software
- BS8200: Battery simulation software
- IT-E186: GPIB interface
- IT-E187: RS232 and analog communication card
- ITcabinet: System cabinet for high-power configurations
- IT-E8301 (20 A): Round cable, 20 A, length 2 m
- IT-E8305-00: Round cable, 60 A, length 4 m
- IT-E8320-00: Round cable, 120 A, length 4 m
- IT-E8240 (20 A): Round cable, 20 A, length 4 m
- IT-E8820-00: Round cable, 200 A, length 2 m
- IT-E177-grey: RS232 and analog communication cable
- IT-E178-grey: GPIB communication cable
- IT-E8005: ITECH warranty extension up to 5 years
- IT-E8003: ITECH warranty extension up to 3 years
Scope of Delivery of the Programmable Bidirectional Regenerative DC Power Supply - IT6000C Series
- ITECH IT6000C series device
- AC power cord
- USB cable
Applications of the Regenerative DC Power Supply for Source and Sink Operation - IT6000C Series
- Batteries (charging, discharging, testing)
- Fuel cells
- Converters and inverters
- Motors and test benches
- Photovoltaics (PV)
- Railway and avionics
- Magnetic field generation
- Automated test systems (ATE)
- Uninterruptible power supplies (UPS)
- Automotive testing, standards DIN 40839, ISO 16750-2, ISO 21848
ITECH is one of the world's largest manufacturers of AC and DC power supplies.
The group's diversified product portfolio includes battery testing and power supply test systems. The company's focus is on a competitive price-performance ratio.