ITECH IT6800A/B | Programmable DC Power Supply
Supplies DUTs flexibly with regulated DC voltage and reduces instrument changes when voltage and current vary during testing.
- ✓ up to 200 W
- ✓ up to 150 V / 10 A
- ✓ dual-range output
from €345.00
€345.00
Prices plus VAT plus shipping costs
Programmable DC Power Supply With Dual-Range Output
ITECH IT6800A/B: For Test Tasks With Different Voltage and Current Values
The ITECH IT6800A/B Series is a compact programmable DC power supply for laboratory, service, development and simple ATE setups.
The instruments provide precisely adjustable DC voltage in CV/CC operation. They are used to supply electronic assemblies, components and devices during functional testing and troubleshooting.
Depending on the model, the dual-range output provides two voltage and current ranges. This keeps the test bench flexible when one test requires more voltage and the next requires more current.
One instrument covers several DC operating points and reduces the need for additional bench-top power supplies or frequent rewiring.
List and timer functions output voltage and current values in a time-controlled sequence. This is useful for recurring functional tests, service procedures or simple end-of-line tests where the sequence should not be set manually each time.
Remote sense, low ripple and fine resolution support a clean supply directly at the DUT.
The ITECH IT6800A/B Series can be integrated into PC-based test setups via RS-232 and USB. The B variants also feature an integrated GPIB interface, making them particularly suitable for older or existing test benches with IEEE-488 connectivity.
The monitor software supports operation, monitoring and remote control from a PC.
IT6800A or IT6800B?
Voltage, current and power are identical for the A and B versions. The difference lies in the test bench connection:
The A models provide RS-232 and USB, while the B models also include a GPIB interface for integration into existing IEEE-488 systems.
Alternative Products
If two independently controlled DC outputs are required in one unit, the ITECH IT-M3100D Dual-Channel DC Power Supply is a suitable alternative. For significantly higher power, higher voltages or wider current ranges, we recommend the ITECH IT-M3100 Series.
Related Product Categories
One DC Power Supply for Different Test Tasks
Need more voltage in one test and more current in the next? We help you choose the right IT6800A/B model and interface for your test bench.
Variants
Specifications
| Output power | 72–200 W |
|---|---|
| Output voltage | 8–150 V DC |
| Output current | 1.5–10 A DC |
| Resolution | 1 mV/0.1 mA |
| Accuracy | ≤0.04% + 8 mV/≤0.1% + 5 mA |
| Protection functions | OVP, OTP |
| Interfaces | RS-232/USB (A & B models), GPIB (only B models) |
| Remote Sense | Measurement directly at the DUT to compensate for line losses |
| Operating modes | Constant Voltage (CV) / Constant Current (CC); automatic and load-dependent switching |
| LIST mode | Sequence operation with onboard storage; up to 150 steps, minimum step time 100 ms |
| Output Timer | Time-controlled output with automatic shutoff; setting range 0.1 s–9999.9 s or 0.1 min–9999.9 min |
| Design | 1/2-rack (2U) |
| Dimensions | 214.5 mm x 88.2 mm x 354.6 mm |
| Weight | 7.5–8.5 kg (depending on model) |
Options & Accessories
| IT-E9005 | ITECH warranty extension up to 5 years |
|---|---|
| IT-E9003 | ITECH warranty extension up to 3 years |
| IT-E151A | 19" rack mounting kit |
| IT-E151 | 19" rack installation kit |
| IT-E30110-AB | 10 A/1 m, crocodile clip -> banana plug |
| IT-E30110-BB | 10 A/1 m, banana plug -> banana plug |
| IT-E30110-BY | 10 A/1 m, banana plug -> Y terminal |
Scope of Delivery
| IT6800A/B series unit(s) |
| AC power cable |
| USB connection cable |
Applications
| Design verification & characterization in the lab |
| Production tests and end-of-line test stands |
| Conformity testing in ATE systems |
| Power/signal source in test setups for electrical safety, insulation testing, and HV tests (with suitable accessories, e.g. a safety tester) |
| Additional applications in research, education, and quality assurance |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
LXinstruments has been supplying ITECH equipment since 2020. When an individual instrument needs to become part of a complete test system, we support you with product selection, system sizing and integration into the automation environment. The key is to ensure that the DUT, power requirements, interfaces and test sequence work together.
We also use ITECH equipment in customized test systems. Depending on the test application, we combine power supplies, electronic loads, grid simulation and measurement technology so that the functions match both the DUT and the test sequence.