Single-Channel DC Electronic Load | PEL-500 Series
€1,134.00*
€1,134.00*
Prices plus VAT plus shipping costs
Product Information "Single-Channel DC Electronic Load | PEL-500 Series"
GW Instek PEL-500 Series
DC Electronic Load
The PEL-500 series single-channel electronic load has a total of 5 models and provides 0 ~ 80 V / 0 ~ 500 V voltage operating ranges and 250 ~ 700 W power operating range. The series can be applied to R&D, quality control, ATE system and production test, including voltage source/current source test; switching power supply transient response; constant voltage mode for current limiting test; battery simulation; and battery discharge test.
Features of the DC Electronic Load PEL-500 Series
- 5-digit digital voltage, current and power meter
- Simultaneous display of voltage, current, and power
- Short-circuit time can be set during short-circuit test
- Automatic test function of overcurrent protection/overpower protection
- The battery discharge test function can set the discharge stop voltage (Vbatt), discharge capacity and stop discharge time.
- Surge test can simulate boot overshoot current and transient current from hot plugging.
- Constant current, constant resistance, constant voltage, constant power and Dynamic mode
- Overvoltage, overcurrent, over power, over temperature protection and reverse polarity detection
- Voltage polarity display can be set to positive value ("+") or negative value ("-")
- Communications interface: RS232, USB
Related links to "Single-Channel DC Electronic Load | PEL-500 Series"
Features of the PEL-500 Series
- 5-digit digital measurement of voltage, current, and power
- Simultaneous display of voltage, current, and power
- Adjustable short-circuit duration for short-circuit tests
- Automatic overcurrent and overpower protection test function
- For battery discharge tests, discharge cut-off voltage (Vbatt), discharge capacity, and discharge stop time can be set
- Surge test simulates inrush current and transient current during plug-in
- Constant current, constant resistance, constant voltage, constant power, and dynamic modes
- Protection against overvoltage, overcurrent, overload, overtemperature, and reverse polarity
- Voltage polarity display selectable as positive (+) or negative (−)
- Communication interfaces: RS-232, USB
Optional Accessories for the PEL-500 Series
- GTL-246: USB cable for device interface
- GTL-238: RS-232 cable, 9-pin, type M–F, length 1000 mm
Scope of Delivery of the PEL-500 Series
- PEL-500 Series unit(s)
- Operating manual
- Power cord
Applications of the PEL 500 Series
- Voltage and current source testing
- Transient response of switching power supplies
- Constant voltage mode for current limiting tests and battery simulation
- Battery discharge test
- Research and development, quality control
- ATE systems
- Production testing
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.