- Order number: KW-E5000-Serie
Kewell E5000 Series
Programmable DC Electronic Load
The E5000 series from Kewell is a compact, electronic DC load characterized by a wide power range and three different voltage ranges. The numerous different load functions make the series suitable for linear and/or non-linear tests in a wide range of applications. This makes the devices an efficient and reliable solution for testing power and automotive electronics.
Specifications of the programmable DC Electronic Load E5000 Series
- Voltage range: 0 V – 1200 V
- Current range: up to 2000 A
- Interfaces: RS232 / CAN / LAN / USB / ext. analog
- Optional interface: GPIB
- Working modes: CV, CC, CP. CR, CC+CV, CV+CR, CR+CC
- Master-slave parallel connection for up to 10 units to increase output up to 66 kW
- Protection functions: OVP, OCP, OPP, OTP, Verpolungsschutz
- Short-circuit simulation
- CZ-Mode for simulating capacitive loads when switching on
Applications of the programmable DC Electronic Load E5000 Series
Tests of
- Traction batteries
- Fuel cells
- DC charging pile
- OBCs (On-Board Charger)
- SMPS (Switched-Mode Power Supplies)
- UPS
- Photovoltaic applications
- etc.
Available models of the programmable DC Electronic Load E5000 Series
Normal version
Cost-effective basic specification
Model | Voltage range DC [V] | Max. Output Current [A] | Power Output [kW] | Measuring accuracy Voltage [% FS] | Measuring accuracy Current [% FS] |
E5000NG-2K2-0150-0200 | 0–150 | 200 | 2,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-4K4-0150-040 | 0–150 | 400 | 4,4 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-6K6-0150-0600 | 0–150 | 600 | 6,6 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-13K2-0150-1200 | 0–150 | 1200 | 13,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-19K8-0150-1800 | 0–150 | 1800 | 19,8 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-26K4-0150-2000 | 0–150 | 2000 | 26,4 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-2K2-0600-0140 | 0–600 | 140 | 2,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-4K4-0600-0280 | 0–600 | 280 | 4,4 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-6K6-0600-0420 | 0–600 | 420 | 6,6 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-13K2-0600-0840 | 0–600 | 840 | 13,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-19K8-0600-1260 | 0–600 | 1260 | 19,8 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-26K4-0600-1680 | 0–600 | 1680 | 26,4 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-2K2-1200-0080 | 0–1200 | 80 | 2,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-4K4-1200-0160 | 0–1200 | 160 | 4,4 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-6K6-1200-0240 | 0–1200 | 240 | 6,6 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-13K2-1200-0480 | 0–1200 | 480 | 13,2 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-19K8-1200-0720 | 0–1200 | 720 | 19,8 | 0,05+0,025 | ≤0,1+0,1 |
E5000NG-26K4-1200-0960 | 0–1200 | 960 | 26,4 | 0,05+0,025 | ≤0,1+0,1 |
Pro version
Higher measuring accuracy for current and voltage; Extended functions: Dynamic load sweep, sine wave mode, determination of OCP/OPP points
Model | Voltage range DC [V] | Max. Output Current [A] | Power Output [kW] | Measuring accuracy Voltage [% FS] | Measuring accuracy Current [% FS] |
E5000PG-2K2-0150-0200 | 0–150 | 200 | 2,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-4K4-0150-040 | 0–150 | 400 | 4,4 | 0,025+0,025 | 0,05+0,05 |
E5000PG-6K6-0150-0600 | 0–150 | 600 | 6,6 | 0,025+0,025 | 0,05+0,05 |
E5000PG-13K2-0150-1200 | 0–150 | 1200 | 13,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-19K8-0150-1800 | 0–150 | 1800 | 19,8 | 0,025+0,025 | 0,05+0,05 |
E5000PG-26K4-0150-2000 | 0–150 | 2000 | 26,4 | 0,025+0,025 | 0,05+0,05 |
E5000PG-2K2-0600-0140 | 0–600 | 140 | 2,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-4K4-0600-0280 | 0–600 | 280 | 4,4 | 0,025+0,025 | 0,05+0,05 |
E5000PG-6K6-0600-0420 | 0–600 | 420 | 6,6 | 0,025+0,025 | 0,05+0,05 |
E5000PG-13K2-0600-0840 | 0–600 | 840 | 13,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-19K8-0600-1260 | 0–600 | 1260 | 19,8 | 0,025+0,025 | 0,05+0,05 |
E5000PG-26K4-0600-1680 | 0–600 | 1680 | 26,4 | 0,025+0,025 | 0,05+0,05 |
E5000PG-2K2-1200-0080 | 0–1200 | 80 | 2,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-4K4-1200-0160 | 0–1200 | 160 | 4,4 | 0,025+0,025 | 0,05+0,05 |
E5000PG-6K6-1200-0240 | 0–1200 | 240 | 6,6 | 0,025+0,025 | 0,05+0,05 |
E5000PG-13K2-1200-0480 | 0–1200 | 480 | 13,2 | 0,025+0,025 | 0,05+0,05 |
E5000PG-19K8-1200-0720 | 0–1200 | 720 | 19,8 | 0,025+0,025 | 0,05+0,05 |
E5000PG-26K4-1200-0960 | 0–1200 | 960 | 26,4 | 0,025+0,025 | 0,05+0,05 |
Scope of delivery of the programmable DC Electronic Load E5000 Series
- Gerät(e) of the E5000 Series
- Power cord
- Operating manual
Founded in China in 2011, Kewell is a dynamic company providing test solutions and intelligent manufacturing equipment. Its main product lines include test power supplies, hydrogen energy test equipment and test equipment for power semiconductors. The broad product portfolio covers multiple application areas for the photovoltaic, fuel cell, battery, semiconductor and automotive industries. The company places great emphasis on innovation and technological development in order to offer precise and future-oriented test solutions and is striving to expand worldwide.
KW-G6000-Serie
KW-D2000-EV-Serie
KW-C3000-Serie
KW-S7000-H-Serie
GW-PEL-3000-3000H-Serie
MPE-MT-Serie
KW-S7000-L-Serie
GW-PSB-2000-Serie
GW-PEL-2000B-Serie
MPE-TS-Serie
GW-GSM-20H10