ITECH IT8500G+ | DC Electronic Load
Measure ripple directly under load and automate multi-channel testing – for faster, repeatable tests with less external equipment and setup effort.
- ✓ Power: up to 600 W
- ✓ Voltage: up to 600 V
- ✓ Current: up to 200 A
from €493.00
€1,470.00
Prices plus VAT plus shipping costs
Programmable Electronic DC Load
ITECH IT8500G+: Programmable DC Load for Development, Production, and ATE
The ITECH IT8500G+ Series comprises programmable electronic DC loads for development, production, and burn-in testing as well as integration into automated test equipment (ATE). The series combines programmable DC load testing with integrated ripple measurement and synchronized multi-channel operation.
Voltage and current ripple can be measured directly with the electronic load. This allows ripple components of switching power supplies and chargers to be evaluated under defined load conditions without requiring a separate oscilloscope setup. The measurement bandwidth extends up to 300 kHz.
For multi-channel test setups, up to 16 instruments can be cascaded and controlled together in Multi-Channel mode. This enables multi-channel test systems and burn-in systems to be implemented with reduced communication and integration effort. The IT8511G+ model adds functions for testing common fast-charging protocols.
Alternative Products
For significantly higher power levels and scalable high-power DC load testing, the ITECH IT8400 high-power electronic DC load is a suitable option. If regenerative energy feedback is also required, the ITECH IT8000 regenerative electronic DC load is a suitable alternative.
Related Product Categories
Variants
Specifications
| Voltage range | up to 600 V, depending on the model |
|---|---|
| Current range | up to 200 A, depending on the model |
| Power range | 150 to 600 W |
| Operating modes | CC, CV, CR, CW, CR+CC, CV+CC, and CR-LED |
| Ripple measurement | voltage and current ripple with a measurement bandwidth up to 300 kHz, without an additional oscilloscope |
| Multi-Channel operation | up to 16 instruments can be cascaded, optimized for multi-channel and burn-in test systems |
| Dynamic operation | dynamic load operation up to 20 kHz |
| Measurement resolution | down to 0.1 mV and 0.1 mA |
| Programming and test functions | LIST, Auto Test, battery discharge with cut-off by time, voltage, or capacity, OCP/OPP test, and short-circuit mode and measurement |
| Fast-charging protocols, IT8511G+ | QC2.0, QC3.0, PE+, PE2.0+, USB PD2.0, USB PD3.0, FCP, and SCP |
| Current monitoring | 0 to 10 V monitor output for current waveform monitoring without a separate current probe |
| Interfaces | USB as standard, LAN depending on the model |
Options & Accessories
| IT-E9005 | ITECH Warranty up to 5 years |
|---|---|
| IT-E9003 | ITECH Warranty up to 3 years |
| AC power cord | |
| IT-E30312-YY | 30A/1.2m/Y terminal |
| IT-E30320-YY | 30A/2m/Y terminal |
| USB | for USB port communication |
| IT-E151A | 19'' Rack mount kit |
| IT-E151 | 19'' Rack mount kit |
Scope of Delivery
| Unit(s) of the IT8500G+ series |
Applications
| Switching power supply testing |
| Charging adapter and fast charger testing |
| Battery testing and battery discharge |
| Power bank testing |
| Protection function testing of power modules |
| Burn-in testing and automated test equipment (ATE) |
Links & Downloads
Available Documents (Subject to Change)
Supplier
LXinstruments has been supplying ITECH equipment since 2020. When an individual instrument needs to become part of a complete test system, we support you with product selection, system sizing and integration into the automation environment. The key is to ensure that the DUT, power requirements, interfaces and test sequence work together.
We also use ITECH equipment in customized test systems. Depending on the test application, we combine power supplies, electronic loads, grid simulation and measurement technology so that the functions match both the DUT and the test sequence.
Similar Items
IH-IT8500plus-Serie
Price on request