ITECH IT6100B | Programmable DC Power Supply
Fast, finely controlled DC supply for power-up tests – with remote sense and integrated measurement functions built into the test flow.
- ✓ 20–72 V / 1.2–5 A / 86.4–150 W
- ✓ 0.1 mV / 0.01 mA resolution
- ✓ Fast DC rise without overshoot
Programmable High-Accuracy DC Power Supply for Lab Tests
ITECH IT6100B: Precise DC Output for Power Modules and PCBs
The ITECH IT6100B Series is a programmable DC power supply for test benches, laboratory setups and PC-based tests on power modules, PCBs, medical devices and electronic rectifiers. The models cover 20 to 72 V, 1.2 to 5 A and 86.4 to 150 W.
Power-Up Tests with Controlled DC Rise
With up to 0.1 mV / 0.01 mA resolution and waveform priority mode, the series generates fast voltage or current rise waveforms without overshoot. This allows power-up tests, startup sequences and high-accuracy DC test sequences to be carried out under controlled conditions.
Remote Sense, List Mode and Timer
Remote sense compensates line losses by measuring directly at the DUT. For recurring test sequences, the IT6100B Series provides 100 memory groups, list mode and a timer from 0.01 to 60,000 s.
Measurement Functions and PC Control
The integrated 5½-digit voltmeter measures external voltages up to 40 V; the digital milliohmmeter measures resistance using the four-wire method up to 1 kΩ. USB, RS232 and SCPI are available for PC control. GPIB is relevant only after an availability check.
What Applications Is the ITECH IT6100B Series Designed For?
The ITECH IT6100B Series is designed for high-accuracy, low-noise DC supply in laboratory and test applications. Typical use cases include power modules, PCBs, medical devices and electronic rectifiers. For sink operation, regenerative operation or battery discharge, electronic loads or bidirectional DC sources are the better choice.
Alternative Products
Depending on the test task, suitable alternatives include the ITECH IT-M3200 DC Precision Power Supply, the ITECH IT6300 Three-Channel DC Power Supply or the more powerful ITECH IT6502D DC Power Supply.
Related Product Categories
Power Supplies and Sources 0–100 V | Programmable Power Supplies and Sources | SMU / Source Measure Units | Battery Measurement Technology | Test Systems.
Does Your Voltage Profile Match the DUT?
For fast power-up tests, voltage range is only one factor. Ramp behavior, sense wiring and PC control must match your test sequence. We help you select the right IT6100B model.
Variants
Specifications
| DC output range depending on model |
|
|---|---|
| Resolution | up to 0.1 mV and 0.01 mA |
| Programming resolution | 1 mV and 0.1 mA |
| Output waveform priority mode | fast voltage or current rise waveforms without overshoot |
| List mode | editable voltage and current profiles for recurring test sequences |
| Timer function | 0.01 to 60,000 s |
| Memory | 100 memory groups |
| Remote sense | compensates voltage drops on the load leads |
| Interfaces |
|
| Protection functions | OVP, OCP and OTP |
| Integrated measurement functions | 5½-digit digital voltmeter up to 40 V and milliohmmeter with four-wire measurement from 0 to 1 kΩ |
Options & Accessories
| IT-E30110-AB | red and black test leads, 10 A, 1 m, crocodile clip to banana plug |
|---|---|
| IT-E30110-BB | red and black test leads, 10 A, 1 m, banana plug to banana plug |
| IT-E30110-BY | red and black test leads, 10 A, 1 m, banana plug to Y terminal lug |
| IT-E30312-YY | red and black test leads, 30 A, 1.2 m, Y terminal lug to Y terminal lug |
| IT-E30320-YY | red and black test leads, 30 A, 2 m, Y terminal lug to Y terminal lug |
| IT-E30615-OO | red and black test leads, 60 A, 1.5 m, ring terminal to ring terminal |
| IT-E151A | 19" rack mounting kit |
| IT-E151 | 19" rack mounting kit |
| IT-E9005 | ITECH warranty extension up to 5 years |
| IT-E9003 | ITECH warranty extension up to 3 years |
Scope of Delivery
| IT6100B Series device(s) |
| USB connection cable |
| AC power cord |
| CD with user manual |
Applications
| Power-up tests on aerospace power modules |
| DC supply for circuit boards and assemblies |
| Lab tests on medical devices |
| Functional testing of electronic rectifiers |
| Controlled setpoint steps in precise DC test sequences |
Videos
Links & Downloads
Available Documents (Subject to Change)
Supplier
Power Testing Solutions from ITECH
Control and Measure Voltage, Current and Energy Flow
ITECH develops hardware and software for electrical power testing. The product portfolio includes programmable DC and AC power supplies, electronic loads, bidirectional power supplies, grid simulators, source measure units, power meters, battery testers and automatic test systems.
More Than 1,200 In-House Developed Models
ITECH develops both the instruments and the associated software in-house. The portfolio has grown to more than 1,200 models across over 60 product series and more than 20 standardized test systems.
Customers in more than 70 countries trust and use ITECH products.
Test Equipment for Electrified Products
ITECH instruments are used to test battery cells, modules and packs, charging stations, on-board chargers, PV inverters, energy storage systems, power supplies and power semiconductors.
The main focus is on test and measurement applications in e-mobility, renewable energy, automotive and industrial electronics, medical technology, semiconductor development, IoT, research and education.
Select ITECH Products by Test Application
In the LXinstruments Shop, you will find ITECH instruments for:
- Charging, discharging and simulation tests on batteries
- Testing power supplies and DC/DC converters
- Testing charging stations and on-board chargers
- Grid and PV simulation
- Measurements on power semiconductors and electronic assemblies
- and much more …
Looking for the Right ITECH Instrument? Talk to Us.
Email: sales@lxinstruments.com
Tel.: +49 (0) 7032 / 895 93-3