For professionals (EU) | All data subject to change

Test Systems

Test systems include all measuring instruments, a power supply, the cabling between the individual devices via GPIB / LAN and the DUT (Device under Test), as well as a normal PC.
Test systems from LXinstruments can be

  • modularly configured via our Open Test Platform (OTP2) as well as
  • tailored to your specific needs.

Our test systems have an attractive price-performance ratio due to the high standardization rate. Ideally, our software solutions complement each other, ranging from the operator environment to the evaluation. 

We are looking forward to your call.

Test systems include all measuring instruments, a power supply, the cabling between the individual devices via GPIB / LAN and the DUT (Device under Test), as well as a normal PC. Test systems from... read more »
Close window
Test Systems

Test systems include all measuring instruments, a power supply, the cabling between the individual devices via GPIB / LAN and the DUT (Device under Test), as well as a normal PC.
Test systems from LXinstruments can be

  • modularly configured via our Open Test Platform (OTP2) as well as
  • tailored to your specific needs.

Our test systems have an attractive price-performance ratio due to the high standardization rate. Ideally, our software solutions complement each other, ranging from the operator environment to the evaluation. 

We are looking forward to your call.

Close filters
  •  
  •  
  •  
  •  
  •  
1 From 10
No results were found for the filter!
Vitrek 964i series | Front view High Voltage Switching System | 964i Series
Vitrek
VI-964i-Serie

Automated high-voltage switching system with 3 kV, 7 kV, 10 kV or 15 kV, 40 A, can be extended as required
Price on request
Vitrek V7X Series | view: front Multifunctional Hipot Tester | V7X Series
Vitrek
VI-V7X-Serie

Multifunctional Hipot Tester for insulation resistance tests, Ground Bond and continuity testing
Price on request
TMS Test Management Software | LX-TMS TMS Test Management Software | LX-TMS
LXinstruments GmbH
LX-TMS

LXinstruments TMS Test Management Software Test sequencer for small and midsize systems Various tests are required in...
From €1,350.00 *
Monitor holder for 19 “rack installation Monitor holder for 19 “rack installation
LXinstruments GmbH
LX-ZZ-0017-01

Monitor holder for 19 “rack installation
Price on request
VT-EMX-7510 VT-EMX-7510
VTI Instruments
VT-EMX-7510

.
Price on request
VT-EMX-7511 VT-EMX-7511
VTI Instruments
VT-EMX-7511

.
Price on request
VT-EMX-7512 VT-EMX-7512
VTI Instruments
VT-EMX-7512

.
Price on request
VT-EMX-7513 VT-EMX-7513
VTI Instruments
VT-EMX-7513

.
Price on request
VT-EMX-7514 VT-EMX-7514
VTI Instruments
VT-EMX-7514

.
Price on request
VT-EMX-7515 VT-EMX-7515
VTI Instruments
VT-EMX-7515

.
Price on request
GPIB to LAN converter | pluggable adapter GPIB to LAN converter | pluggable adapter
Prologix
PL-GPIB-LAN

pluggable adapter, no drivers and GPIB line required, standard RJ-45 and IEEE 488 connectors
Content 1 piece(s)
From €449.10 *
GPIB to USB converter | plug-in adapter GPIB to USB converter | plug-in adapter
Prologix
PL-GPIB-USB

Pluggable adapter, support for multiple devices, standard USB and IEEE 488 connectors
Content 1 piece(s)
From €269.10 *
1 From 10

Test systems are used in a wide variety of applications and industries. Test systems check whether electronic assemblies, devices, etc. comply with the defined functions and parameters even under load.

What types of functional tests are there?

  • Run-In:
    Under continuous temperature change, it is tested whether assemblies remain efficient in their defined temperature range and do not fail.
  • Burn-In:
    Here, material and component weaknesses are to be detected by simulating assembly aging during the test.
  • HASS (Highly accelerated stress screen):
    Before final assembly of the assemblies takes place, they are again subjected to a mechanical stress test at a stable temperature.
  • HALT (Highly accelerated life test):
    The test specimens are subjected to extreme temperature fluctuations and mechanical stresses during the production process.

Modular functional test systems can be configured directly in consultation with our colleagues in a modular system. Due to the standardized components, an attractive price/performance ratio is realized.

Individualized solutions are also possible, so that even existing test systems can be expanded as desired.

The software - a central element

The central element of functional test systems is the applied software. LXinstruments has extensive and powerful software modules that are optimally coordinated with each other and designed for all requirements.

1. Test Sequencer Common Operator Environment (TSCOE)
TSCOE is the graphical user and operator interface that communicates with the automation technology used.
2. Test management software (TMS)
Diagnoses and analyzes electronic components and is particularly suitable for small and medium-sized systems.
3. Magpie
is an advanced evaluation and data mining application to generate reports and trend analysis based on the selected data.
4. OPC UA interface
It enables a standardized connection of all test systems to a

  • Process control system (guideline computer)
  • Automation and handling systems as well as
  • PLC (programmable logic controller).

Of course, there are also test systems that have other issues, such as battery or fuel cell tests, where electrochemical processes and impedance measurements are the focus. More information and products on this can be found in our electrochemistry and battery measurement technology sections.

Viewed