ITECH IT-N6300 | Programmable Three-Channel DC Power Supply
Three isolated, flexibly combinable DC outputs enable precise and reproducible testing in the lab, R&D, and ATE applications.
- ✓ Current: up to 10 A
- ✓ Voltage: up to 60 V
- ✓ Power: up to 445 W
Prices plus VAT plus shipping costs
Three DC Outputs for Versatile Electronics Testing
ITECH IT-N6300: Programmable Triple-Channel DC Power Supply for Laboratory and Test Applications
The ITECH IT-N6300 Series features three galvanically isolated DC outputs that supply electronic assemblies independently. When higher voltage or current is required, Channels 1 and 2 can be connected in series or parallel. In tracking mode, both channels can be controlled synchronously, while bipolar mode provides positive and negative supply voltages. The third channel operates independently, allowing separate adjustment of the output voltage and current limit.
The LIST function allows voltage and current profiles to be programmed, stored, and reused for repeatable tests. Auto-range helps make full use of the available voltage and current range. Constant voltage or constant current priority (CV/CC) helps prevent voltage or current overshoot. FOLDBACK and other protection functions activate under defined conditions. Remote sensing also compensates for voltage drops in the test leads.
The A models cover typical laboratory power supply requirements and support remote control via USB. For applications requiring finer voltage and current settings or additional interfaces for automated test systems, the B models offer LAN, RS232, and digital I/O. They also provide a higher maximum output voltage on the third channel.
Alternative Products
For conventional triple-channel testing, the ITECH IT6300 Series is an economical alternative when the additional features of the IT-N6300 are not required. If two independently controlled outputs are sufficient, the ITECH IT-M3100D Series is another option. It delivers higher power per channel and also supports programmable test sequences.
Related Product Categories
Get Started Now - Boost the efficiency of your test and measurement setups with the IT-N6300 Series.
Request your individual quotation today and gain a competitive advantage through precision, flexibility, and maximum operational safety.
Variants
Specifications
| Channels & Isolation | Three fully isolated outputs (CH1–CH3) |
|---|---|
| Operating Modes (Channel Combination) | Independent, series (higher voltage), parallel (higher current), tracking (synchronous), bipolar (positive / negative output voltage) |
| Control Strategy (CC/CV Priority Function) | Selectable current-priority (CC) or voltage-priority (CV) control; prevents overshoot and protects sensitive DUTs |
| Resolution & Accuracy | Fine setting and measurement of voltage and current, with low ripple and noise |
| Dynamics | Very fast programming and transient response for load changes |
| Lead Loss Compensation | Optional local sensing directly at the output or remote sensing at the DUT for precise voltage regulation, even with longer cable runs |
| Lists/Sequences |
|
| User Interface |
|
| Data Logging | USB support for screenshots, data logging, and list files |
| Interfaces | USB (standard); depending on the model, also LAN, RS-232, and digital I/O |
| Auto-Ranging | Automatic range adjustment for flexible applications |
| Protection Functions | OVP, UVP, OCP, UCP, OPP, OTP, FOLDBACK |
Options & Accessories
| IT-E158B | Mounting kit for side-by-side installation of two units in standard cabinets with a depth of ≤790 mm, fully compatible with ITECH cabinets |
|---|---|
| IT-E158D | Mounting kit for single-unit installation in standard cabinets with a depth of ≤790 mm, fully compatible with ITECH cabinets |
| IT-E30110-BB | Test lead, 10 A, 100 cm, banana plug to banana plug, black/red |
| IT-E30110-BY | Test lead, 10 A, 100 cm, banana plug to Y terminal, black/red |
| IT-E30110-AB | Test lead, 10 A, 100 cm, alligator clip to banana plug, black/red |
Scope of Delivery
| IT-N6300 Series unit(s) |
| Power cord |
| USB cable |
| Calibration certificate |
Applications
| Research & Development |
| Design Validation |
| Battery Testing |
| Electronic Test Laboratories & Quality Assurance |
| Production Lines & End-of-Line Testing |
| Automated Test Systems (ATE) |
| Universities & Training Laboratories |
Links & Downloads
Available Documents (Subject to Change)
Supplier
LXinstruments has been supplying ITECH equipment since 2020. When an individual instrument needs to become part of a complete test system, we support you with product selection, system sizing and integration into the automation environment. The key is to ensure that the DUT, power requirements, interfaces and test sequence work together.
We also use ITECH equipment in customized test systems. Depending on the test application, we combine power supplies, electronic loads, grid simulation and measurement technology so that the functions match both the DUT and the test sequence.
Similar Items
IH-IT6300-Serie
IH-IT2700-Serie
Price on request