High Bandwidth Voltage Transducer with Galvanic Isolation | IsoBand V
Downloads (Subject to change)
Product Information "High Bandwidth Voltage Transducer with Galvanic Isolation | IsoBand V"
IsoBand V Series – Galvanically Isolated Voltage Measurement Transducer up to ±2000 V (Bandwidth DC to 8 MHz)
Bandwidth from DC to 8 MHz
The IsoBand V Series captures DC signals with high temporal resolution while maintaining a constant transfer ratio across the entire measurement range.
Galvanic isolation reliably reduces interference and protects both the measurement chain and connected equipment.
This makes the series well suited for applications involving fast transients, PWM signals, and superimposed high-frequency signal components.
High Input Impedance, Low Output Impedance
High input impedance ensures that connected signal sources are not loaded or distorted and increases the electrical safety of the measurement setup.
Low output impedance allows direct connection to digitizers and oscilloscopes and supports the use of long measurement cables with minimal signal loss.
Overvoltage Protection for Measurement Chain and Devices
Short-duration voltage spikes frequently occur in real-world applications.
The IsoBand V Series is designed to handle such events safely and to protect connected measurement equipment.
The output signal is actively limited and saturates in a controlled manner before impermissible levels are reached.
Triple Galvanic Isolation
The internal architecture consistently separates channels, signal paths, and power supply.
This triple galvanic isolation prevents unwanted equalizing currents, increases operational safety, and enables measurements at different ground potentials.
Effective Common-Mode Rejection
Common-mode components at the input are effectively suppressed.
The isolation barrier ensures that ground shifts or superimposed AC components have minimal impact on the measurement result and that a clean, stable output signal is provided.
Linear Transfer Behavior over a Wide Amplitude Range
The transfer ratio remains constant across the entire measurement range.
This linear behavior, combined with stable offset characteristics, enables precise and reproducible measurement results and makes the IsoBand V Series a reliable solution for professional electrical test and measurement applications in development, laboratory, and industrial environments.
Contact Us for Consultation!
Would you like to use the IsoBand V Series in your test or measurement application?
Contact us – our expert team will support you in selecting and integrating the right solution.
| Input Voltage: | 5 V, 10 V, 15 V, 20 V, 50 V, 100 V, 150 V, 200 V, 1000 V, 1500 V, 2000 V |
|---|---|
| Interfaces: | Analog-I/O |
| Output Voltage: | 5 V, 10 V |
Related links to "High Bandwidth Voltage Transducer with Galvanic Isolation | IsoBand V"
Available documents (Subject to change)
Features / Specifications of the IsoBand V Series
- Triple galvanic isolation: channel to channel, primary to secondary, signal to power
- Input voltage: 5 V to 2000 V
- Output voltage: 5 V, 10 V
- Isolation between primary and secondary: up to 1.5 kV continuous and up to 5 kV for a maximum of one minute
- Bandwidth (DC): up to 8 MHz
- DIN rail mounting for quick installation
- Measurement of voltage drop for channel isolation at each DAQ
- Compact form factor for high-channel-density monitoring systems
- High input impedance for high signal integrity across multiple signal sources
- Low output impedance for connection to analog-to-digital converters and oscilloscopes, including long measurement cables
- Proprietary digital technology for wide-bandwidth signal conditioning
- High common-mode rejection to minimize interference
- Overvoltage protection to safeguard connected devices, such as oscilloscopes
- Flat frequency response for stable signal characteristics over a wide frequency range
- High linearity
- Operating temperature: −25 °C to 70 °C
- Weight: 0.238 kg
Options and Accessories for the IsoBand V Series
Verivolt does not offer classic accessories such as cables, adapters, or mounting kits for the IsoBand V Series. Instead, the system is designed as a modular product family that allows different Verivolt measurement transducers and sensors to be combined in a targeted manner.
IsoBand and IsoBlock modules can be precisely matched and combined to form a galvanically isolated measurement chain.
We are happy to assist you and advise you on selecting the appropriate IsoBand and IsoBlock modules for your application.
Scope of Delivery of the IsoBand V Series
- Unit(s) of the IsoBand V Series
Anwendungsbeispiele der IsoBand V-Serie
Spannungsüberwachung an z. B.:
- Batterien
- Brennstoffzellen
- Elektromotoren
- Photovoltaik (PV)
- und vielen weiteren Anwendungen
Verivolt is an American manufacturer of current transformers, voltage transformers, power transformers and filters, with the specialty of very high galvanic isolation of 1kV and above.
Many of the products can be used directly for DIN or top hat rail mounting.
The range of values varies from small currents in the mA range up to 2kA, and isolation of 5kV between input and output with bandwidths >1MHz.
Ähnliche Artikel
VV-IsoBlock-I-ZF-Serie
Price on request
VV-ISOBLOCK-V-3P-Serie
Price on request
VV-ISOBLOCK-V-1C-Serie