ITECH IT7300 | Programmable AC Source
Simulate mains conditions and disturbance profiles, supply DUTs reliably, and automate AC testing with stable output in lab, production, and ATE.
- ✓ 750 VA to 9000 VA
- ✓ 45 Hz to 500 Hz
- ✓ STEP/PULSE/LIST mains disturbances
Programmable AC Source for Mains Simulation and AC Testing
Regulated AC Power Supply for Laboratory, Production, and ATE
The ITECH IT7300 Series is a programmable AC source for laboratories, production, and ATE. As a programmable AC power supply, it uses linear amplifier technology to deliver a low-noise, stable output voltage with fast response. DUTs are supplied with AC voltage, frequency, phase angle, and disturbance profiles.
Simulating AC Mains Disturbances with STEP, PULSE, and LIST
For tests on power supplies, LED drivers, lighting, motors, rectifiers, and assemblies, the IT7300 Series simulates AC mains conditions and mains disturbances. Frequency and phase angle are adjustable from 45 Hz to 500 Hz and 0 to 360°, respectively.
STEP, PULSE, and LIST functions reproduce voltage dips, short interruptions, voltage changes, as well as surge and trap waveforms.
TRIAC Dimmer Simulation for Lighting and Motor Applications
The integrated TRIAC dimmer simulation supports application-oriented tests on dimmable lamps, lighting technology, and simple AC motor applications. This makes it possible to evaluate how DUTs respond to leading-edge or trailing-edge phase control.
AC Power Measurement and Three-Phase Test Setups
The AC power meter measures RMS values, power data, frequency, power factor, apparent power, and peak current directly on the device. Depending on the version, the IT7300 Series covers AC tests from 750 VA to 9000 VA.
For three-phase test setups, three sources are synchronized via the system bus; two slaves follow the master source with a 120° phase shift.
Interfaces and Protection Functions
For automated test systems, RS-232, USB, and LAN with SCPI support are available; GPIB availability must be checked. OCP, OVP, OTP, and OPP protect against overcurrent, overvoltage, overtemperature, and overpower.
Alternative Products
If a smaller linear AC source is sufficient for AC testing, the GW Instek APS-7000E Series is a suitable alternative. For regenerative grid simulation, bidirectional AC testing, or higher power ranges, the ITECH IT7900 Grid Simulator, the Kewell G6000 Series, or the Kewell G9000 Series may be suitable, depending on the test scope.
Related Product Categories
Power Supplies / Sources | Simulators | Bidirectional Power Supply | Electronic Loads
Are you planning AC tests with defined voltage, frequency, phase or power-line disturbance profiles? LXinstruments supports you in selecting the right IT7300 configuration, power and voltage range, single-phase or three-phase test setup, as well as interfaces and automation.
Specifications
| Specification | Value |
|---|---|
| Power | 300 VA, 750 VA, 1500 VA, 3000 VA and three-phase up to 9000 VA, depending on model |
| Output voltage | 0–150/0–300 V or 0–250/0–500 V, depending on model |
| Output current (RMS) | 3/1.5 A, 6/3 A, 12/6 A or 24/12 A, depending on model |
| Output frequency | 45 Hz – 500 Hz |
| Phase angle | 0° – 360°, 0.1° resolution |
| Signal quality | Linear amplifier technology, low-noise and highly stable output |
| Total harmonic distortion | ≤ 0.5% or ≤ 1% at 45 Hz – 500 Hz, depending on model |
| Crest factor | 3 |
| Integrated measurement functions | RMS voltage, RMS current, frequency, active power, power factor, apparent power and peak current |
| Measurement resolution | voltage 0.1 V, current 0.1 mA/1 mA/10 mA, power 0.01 W/0.1 W/1 W, depending on measurement range |
| Voltage accuracy | ±(0.2% + 0.6 V) or ±(0.2% + 1.2 V), depending on model |
| Functions | LIST mode, STEP mode, PULSE mode, sweep function, TRIAC dimmer and speed controller simulation |
| Simulation | power line disturbances, short-term voltage rises and drops, voltage dips, short interruptions, voltage changes, surge and trap waveforms |
| Synchronous output | 5 V output signal, BNC type |
| Interfaces | RS-232, USB and LAN with SCPI support; GPIB depending on model or availability |
| Size | ½ 2U, 3U, 6U, 15U or 27U, depending on model |
| Expandability | three-phase AC function via system bus connection of three devices, depending on model |
| Memory | 10 memory locations |
| Protection functions | OCP, OVP, OPP and OTP |
Options & Accessories
| Manufacturer Number | Name |
|---|---|
| IT-E9005 | ITECH warranty extension up to 5 years |
| IT-E9003 | ITECH warranty extension up to 3 years |
| IT-E31220-OO | Test lead set 120 A, 200 cm, red / black, ring terminal -> ring terminal |
| IT-E30615-OO | Test lead set 60 A, 150 cm, red / black, ring terminal -> ring terminal |
| IT-E32420-OO | Test lead set 240 A, 150 cm, red / black, ring terminal -> ring terminal |
| IT-E32410-OO | Test lead set 240 A, 100 cm, red / black, ring terminal -> ring terminal |
| IT-E33620-OO | Test lead set 360 A, 200 cm, red / black, ring terminal -> ring terminal |
| IT-E30110-AB | Test lead set 10 A, 100 cm, red / black, crocodile clip -> banana plug |
| IT-E30110-BB | Test lead set 10 A, 100 cm, red / black, banana plug -> banana plug |
| IT-E30110-BY | Test lead set 10 A, 100 cm, red / black, banana plug -> Y-clip |
| IT-E30312-YY | Test lead set 30 A, 120 cm, red / black, Y-clip -> Y-clip |
| IT-E30320-YY | Test lead set 30 A, 200 cm, red / black, Y-clip -> Y-clip |
Scope of Delivery
| Scope of Delivery |
|---|
| Unit(s) of the IT7300 series |
| AC power cable |
| USB cable |
| CD including user manual |
Applications
| Application Examples |
|---|
| EMC testing |
| Power grid simulation |
| Research & development |
| Laboratory and production |
| Electronics industry |
| Lighting systems |
| Electric motors |
| Aerospace |
| and many more |
Videos
Links & Downloads
Supplier
ITECH is one of the world's largest manufacturers of AC and DC power supplies. The group's diversified product portfolio includes battery testing and power supply test systems. The company's focus is on a competitive price-performance ratio.